On 19 October 2017 at 07:46, Gert Doering <g...@greenie.muc.de> wrote: > On Thu, Oct 19, 2017 at 06:05:47AM +0200, Peter Rathlev wrote: >> On Wed, 2017-10-18 at 15:39 +0200, Gert Doering wrote: >> > I have an ASR920 that is supposed to have gi0/0/10 and gi0/0/11 in >> > the same bridge group, with a routed IP: >> > >> > interface GigabitEthernet0/0/10 >> > no ip address >> > media-type auto-select >> > negotiation auto >> > cdp enable >> > service instance 10 ethernet >> > encapsulation untagged >> > l2protocol peer stp >> > bridge-domain 10 >> > ! >> ... >> Then configure STP for VLAN "10". It doesn't seem like there is any way >> to map to an arbitrary PVST instance, VLAN ID and bridge domain ID has >> to match.
I don't know the answer to you question but Peter's suggestion sounds like a probably answer to me. However, you didn't share you STP config, or was "l2protocol peer stp" all of it? :) Cheers, James. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/