Hi, You have to use the "ip bgp-community new-format" in order to see the community in the format.
You should try to configure "neighbor x.x.x.x send-community" for the community to be sent to the peer (upstream provider in this case). Setting it in the route-map alone will not do it. Regards On Wed, Oct 25, 2017 at 1:24 AM, CiscoNSP List <[email protected]> wrote: > Hi, > > We are redistributing our own prefixes via iBGP with redist connected + > static with route-map : > > router bgp AAAA > address-family ipv4 > redistribute connected route-map OUR_RANGES > redistribute static route-map OUR_RANGES > > route-map OUR_RANGES permit 10 > match ip address prefix-list PL_OUR_RANGES > set community AAAA:1000 AAAA:1301 AAAA:14000 > > > ip prefix-list PL_OUR_RANGES seq 5 permit XXX.XXX.XXX.0/20 le 32 > > > Which is working fine - but advertisement of the aggregate/supernet to our > upstreams is not allowing prepending of as? (Have performed clear ip bgp > nei_ip) > > > Is it because the prefixes are seen as Origin incomplete vs Origin IGP? > > > router bgp AAAA > address-family ipv4 > neighbor UPSTREAM_A_IPTRANSIT route-map UPSTREAM_A_OUT_OUT out > > > route-map UPSTREAM_A_OUT_OUT permit 30 > match ip address prefix-list PL_OUR_PREFIXES_OUT > set as-path prepend AAAA > > > #sh ip bgp neighbors WWW.WWW.WWW. advertised-routes > Network Next Hop Metric LocPrf Weight Path > *>i XXX.XXX.XXX.0/20 YYY.YYY.YYY.218 0 100 0 ? > > > #sh ip bgp route-map UPSTREAM_A_OUT_OUT > Network Next Hop Metric LocPrf Weight Path > * i XXX.XXX.XXX.0/20 YYY.YYY.YYY.217 0 100 0 ? > *bi YYY.YYY.YYY.217 0 100 0 ? > * i YYY.YYY.YYY.218 0 100 0 ? > *>i YYY.YYY.YYY.218 0 100 0 ? > > > Thanks in advance. > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
