--- Begin Message ---
Hi Guys,
Wondering anyone has issue on ASR1002-X memory. I have 16gb router but I'm
unable to get more than 3.5gb processor memory. Redundancy mode is none. any
idea?
cisco ASR1002-X (2RU-X) processor (revision 2KP) with 3422740K/6147K bytes of
memory.
Processor board ID
6 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
16777216K bytes of physical memory.
6688767K bytes of eUSB flash at bootflash:.
Redundant System Information :
------------------------------
Available system uptime = 45 minutes
Switchovers system experienced = 0
Standby failures = 0
Last switchover reason = none
Hardware Mode = Simplex
Configured Redundancy Mode = Non-redundant
Operating Redundancy Mode = Non-redundant
Maintenance Mode = Disabled
Communications = Down Reason: Failure
Current Processor Information :
-------------------------------
Active Location = slot 6
Current Software state = ACTIVE
Uptime in current state = 45 minutes
Image Version = Cisco IOS Software, ASR1000 Software
(X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S, RELEASE SOFTWARE (fc6)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Sun 26-Jul-15 21:02 by mcpre
BOOT =
bootflash:asr1002x-universalk9.03.16.00.S.155-3.S-ext.SPA.bin,1;
CONFIG_FILE =
Configuration register = 0x2102
Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
Processor 7FB851FF0010 3504656768 398432652 3106224116 3105249280
3105203428
lsmpi_io 7FB8517ED1A8 6295128 6294304 824 824
412
Regards,Whitegrape
--- End Message ---
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
