Would you guys deem two bad TCC2P Cards if the Memory MEM-LOW and then MEM-GONE are thrown which proceeds a reset of the active card? Or... could this be just too many alarms generated over the course of a few months causing the memory to deplete on them? The active TCC2P card appears to deplete on memory once every 3 months and, resets itself and switches to the standby TCC2P. Rinse and repeat on the now active TCC2P card.
Running CTC 9.0.0 for years and years. A few DS3XM12 cards, a couple of MRC12 and a couple of CE-1000-4 Cards and a DS3E card. Two of the DS3XM12 cards are filled with cross connects with the 3rd one half full. CE-1000-4 Cards has half the Ethernet ports lit. An OC3 on the MRC-12 with a few OC12s and a couple of OC48s. DS3XM12 cards are N:1 protect. DS3E is 1:1 protect. CE-1000-4 and MRC12 have SONET circuits as 1:1 protection. Curtis _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
