Hi, I'm out of ideas and options ... on a system that already has several APs of different models, and to which I have (remotely) already connected another 1142 successfully, I tried to migrate another 1142 from standalone to CAPWAP. After putting an appropriate starter image on it (c1140-k9w8-tar.152-4.JA1.tar), it connected to the WLC (2504 w/ 8.3.133.0) and downloaded a newer image (15.3.3) ... all was fine up to here ... anyway, after reloading the AP, it once again started downloading the same image again. And again. And again.
Here's a partial dump of the console messages: *Dec 12 14:23:37.032: Currently running a Release Image validate_sha2_block: Failed to get certificate chain *Dec 12 14:23:37.049: Using SHA-1 signed certificate for image signing validation.%Default route without gateway, if not a point-to-point interface, may impact performance *Dec 12 14:23:41.760: AP image integrity check PASSED *Dec 12 14:23:41.843: validate_sha2_block:No SHA2 Block present on this AP. *Dec 12 14:23:41.879: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset *Dec 12 14:23:41.879: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset *Dec 12 14:23:51.912: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 0 CLI Request Triggered Translating "CISCO-CAPWAP-CONTROLLER"...domain server (192.168.11.15) examining image... extracting info (289 bytes) Image info: Version Suffix: k9w8-.153-3.JBB6 Image Name: c1140-k9w8-mx.153-3.JBB6 Version Directory: c1140-k9w8-mx.153-3.JBB6 Ios Image Size: 8468992 Total Image Size: 8765952 Image Feature: WIRELESS LAN|LWAPP Image Family: C1140 Wireless Switch Management Version: 8.1.131.0 MwarVersion:08018300.First AP Supported Version:05020200. Image version check passed Extracting files... c1140-k9w8-mx.153-3.JBB6/ (directory) 0 (bytes) extracting c1140-k9w8-mx.153-3.JBB6/info (289 bytes) extracting c1140-k9w8-mx.153-3.JBB6/T5.bin (23836 bytes) *Dec 12 14:50:55.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.30.1.100 peer_port: 5246 *Dec 12 14:50:55.504: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.30.1.100 peer_port: 5246 *Dec 12 14:50:55.505: %CAPWAP-5-SENDJOIN: sending Join Request to 172.30.1.100perform archive download capwap:/c1140 tar file extracting c1140-k9w8-mx.153-3.JBB6/c1140-k9w8-xx.153-3.JBB6 (8307214 bytes) *Dec 12 14:50:55.559: %CAPWAP-6-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller. *Dec 12 14:51:05.980: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source I found documents on expired certificates (which do not seem to be the cause here ... added the "allow expired certs" option on the WLC, but that didn't change). From what I can tell, the AP connects just fine ... just don't understand what image it is looking for that is "not found on AP". On the other 1142 that is working, I noticed it is running a different image (that it also got from the controller) - it has c1140-k9w8-mx.153-3.JD11, while the one not working keeps downloading c1140-k9w8-mx.153-3.JBB6 ... Can anybody give me a hint as what is going wrong here, and how to fix it? Thanks in advance! -garry _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
