We have a Nexus 3548 connected to Ethernet transport connected to a Mikrotik CCR on the far end. The CCR's configuration is fairly straight forward, but so is the Nexus. We have a native VLAN (200) and a tagged VLAN (778). We're not seeing each other over 778.
Thoughts? Nexus# show run int eth 1/46 !Command: show running-config interface Ethernet1/46 !Time: Wed Jan 24 07:23:21 2018 version 6.0(2)A6(3) interface Ethernet1/46 description Customer: XXXX switchport mode trunk switchport trunk native vlan 200 switchport trunk allowed vlan 200,778 no cdp enable spanning-tree bpdufilter enable no shutdown Nexus# show mac address-table interface ethernet 1/46 Legend: * - primary entry, G - Gateway MAC, (R) - Routed MAC, O - Overlay MAC age - seconds since first seen,+ - primary entry using vPC Peer-Link VLAN MAC Address Type age Secure NTFY Ports/SWID.SSID.LID ---------+-----------------+--------+---------+------+----+------------------ * 200 d4ca.6d74.3eb2 dynamic 2270 F F Eth1/46 ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
