Hello Gauthier, Thanks for your feedback. I'll find out another way then.
Regards, Mouniri Envoyé par BlueMail Le 13 mars 2018 à 14:28, à 14:28, Gauthier DOUCHET <[email protected]> a écrit: >Hello Mouniri, > >I met the same problem with a GRE tunnel on ARS920. >At this moment, I haven't found a working solution. >I tried to play with MTU values but didn't seem to have an impact. > >Gauthier > >2018-03-12 21:24 GMT+01:00 Mouniri Md <[email protected]>: > >> Hello all, >> >> I tested gre tunnel on a ASR 903 and I have slow speed (less than >10Mbps) >> when doing some iperf test whereras when gre tunnel is not used I can >reach >> the wire speed. >> I tried to play with the mtu without success. >> >> Do someone have already experiencing this? It looks like that gre >trafic >> is handled in cpu and not in hard, but I cannot find any >documentation >> explaining this. >> >> Thank you for your help. >> >> Regards, >> Mouniri >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > > >-- >Gauthier DOUCHET _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
