On 19 June 2018 at 20:48, Scott Miller <[email protected]> wrote: > I'm trying to come up with a config for have both MPLS (within a vrf) and > DIA on the same router,. I have what I thought would work all lab'd up, > but it's not all the way there and i'm not sure what i'm missing, or if it > will even work this way. > > All Cisco equipment: (configs attached) > > cust-switch <--> 3825 <--> ME3600 <--> 3825 <--> cust-switch > > > > the switch(s) have an ip address within vlan 100 .254 repectively > > I can see the subnet from the neighboring device in the vrf routing table, > an can ping .2 (local to the router, on FE0/0/0) but can not ping .254 from > remote side. > > Anyone able to give this a once-over would be greatly appreciated. > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/
Hi Scott, Basically - what Brian said. Looks like you're missing a return route on the .254 devices. Also I can reach 208.123.206.234 - in my web browser from home - I'd turn that off, or ACL it, it's a bit of a security nightmare! Cheers, James. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
