Hi, Is the l2protocol [ forward | tunnel | peer ] [ protocol ] configuration within the EVC what you’re looking for?
https://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/release/15-4_3_S/configuration/guide/3800x3600xscg/swevc.html#27634 <https://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/release/15-4_3_S/configuration/guide/3800x3600xscg/swevc.html#27634> https://www.cisco.com/c/en/us/td/docs/wireless/asr_901s/scg/b_scg_for_asr901s/b_scg_for_asr901s_chapter_0100000.pdf <https://www.cisco.com/c/en/us/td/docs/wireless/asr_901s/scg/b_scg_for_asr901s/b_scg_for_asr901s_chapter_0100000.pdf> > On Jul 27, 2018, at 8:32 AM, <[email protected]> <[email protected]> wrote: > > > Hi, > > i got two ethernet-links, > - one between me-3800'x and > - one between me-3800 and asr920. > They have been created doing mpls-xconnect's. > > Connecting my own "CE2.0" CPE's, > - on the first link, my OAM's find their way, everything OK. > - On the Circuit with the asr920, the OAM's don't come out on the other end, > so my NNI Ports are marked "down". > (disabling OAM, LLDP neighborhood comes up, my inband-mgmt is working, > ...) > > I do not have access to those devices from our carrier, > and have not got exact model and IOS Version. > Is there any special to configure? > Something like "l2cp tunnel all" ? > > (I found "transparent-cfm" but this is in the context of > CarrierEthernetConfig and not MPLS.) > > I hope that STP BPDUs will be transported (in both directions) over that > xconnect. > > Thank you for any ideas, > > Juergen. > > > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
