Hi
I have a problem with a 6506 with WS-SUP720-3BXL SUP and the line card in question is WS-X6704-10GE. Only port 4 port is in use and it’s running mols, TE, BGP (no full table) and so on. Port 4 is connected via multimode to a switch that is intermediate device to another router. Everything seems to work fine when traffic levels is 1-1.5Gbps, when pushing above that the port goes down on the 6500 and comes right back up again. I can’t find any clues on what is going on. No errors to talk about, optics looks good and so on. Any ideas? Johan _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/