Harry, What Supervisor engine are you running, and what IOS/IOS-XE version? Also, what error are you getting when you enter "ip mfib fastdrop"?
I don't know how much luck you're going to have with TAC, that chassis has been EoS since April of this year. Thanks, Zach Puls Network Engineer | MEF-CECP KsFiberNet -----Original Message----- From: cisco-nsp <cisco-nsp-boun...@puck.nether.net> On Behalf Of Harry Hambi - Atos Sent: Friday, November 09, 2018 06:28 To: cisco-nsp@puck.nether.net Subject: [c-nsp] 4500 chassis Hi All, Trying to add the command: IP mfib fastdrop to a WS-C4510R+E 10 slot switch, this is to protect the CPU from non-RPF traffic, ie traffic that fails RFF checks. This command did work on older chassis, before I open a Tac case for this has anyone else experienced this issue?. Thanks in advance. Harry Hambi BEng(Hons) MIET Rsgb ---------------------------- http://www.bbc.co.uk This e-mail (and any attachments) is confidential and may contain personal views which are not the views of the BBC unless specifically stated. If you have received it in error, please delete it from your system. Do not use, copy or disclose the information in any way nor act in reliance on it and notify the sender immediately. Please note that the BBC monitors e-mails sent or received. Further communication will signify your consent to this. --------------------- _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/