Hello Gentlemen, I wanted to configure whether BGP multipath feature work for/install a route learned from the same AS but eBGPand iBGP neighbors.
for example, I have four routers A, B, C & D. Router A and B are iBGP neigbors in ASN100 and a prefix 10.0.0.0/8 attache to both. Router C and D are iBGP neighbors in ASN100. Router A has an eBGP with Router C and Router B has an eBGP neighborship with Router D. Now Router A receives prefix 10.0.0.0/8 from Router C via eBGP and from Router B via iBGP. In this scenario, Router A install the prefix in routing table that learned from Router C because it learned via eBGP. So the question is can I have both eBGPand iBGP paths install in the routing table with the help of multipath feature? I tried but it didn't work. In a nutshell, i wanted to ask if Multipath work for a prefix that being learned from eBGP and iBGP? >From my understanding, all the best path criteria have to tie before multipath comes in picture. Regards _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
