Nevermind I actually figured this out. I had created the V6 ACL as a V4 ACL.
Apologies for the bytes. -----Original Message----- From: cisco-nsp <[email protected]> On Behalf Of Drew Weaver Sent: Wednesday, January 13, 2021 12:01 PM To: '[email protected]' <[email protected]> Subject: [c-nsp] NXOS 7 apply VTY access-list to both IPv4 and IPv6 Hello, I am doing basic configuration on a switch with NXOS 7. It seems to not want to let me specify different ACLs per "address family" even though it seems to imply that it should be possible. If I enter the command as "ip access-class V4ACL in" and then try to enter "ipv6 access-class V6ACL in" it says: ACL with given name exists with different type It is not a huge deal because CoPP filters it first, but I would like to do it for the sake of paranoia and consistency. It doesn't seem to be possible to create an ACL that is both IPv4 and IPv6 on this platform, so I am not entirely certain how you do this. Thanks, -Drew _______________________________________________ cisco-nsp mailing list [email protected] https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailman_listinfo_cisco-2Dnsp&d=DwICAg&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=OPufM5oSy-PFpzfoijO_w76wskMALE1o4LtA3tMGmuw&m=_0xdyUFzHei0BVlt5FeNWn1NB6M1VAlq8UquBTATmY8&s=zdo83IO7gCmeeQPmDv_zrwEhIS5FRVbvUttgzMeSEkg&e= archive at https://urldefense.proofpoint.com/v2/url?u=http-3A__puck.nether.net_pipermail_cisco-2Dnsp_&d=DwICAg&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=OPufM5oSy-PFpzfoijO_w76wskMALE1o4LtA3tMGmuw&m=_0xdyUFzHei0BVlt5FeNWn1NB6M1VAlq8UquBTATmY8&s=HavN1jnpsgGQa4V-PZQAKKapytaGyR47SsWz81CBTsg&e= _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
