Thanks -- that was exactly what I was looking for. I'm attempting to prove a circuit. I'm pretty sure that it's operating correctly, but I wanted the peace of mind that what I believed was happening was correct.
On Fri, Jan 15, 2021 at 10:33 AM Thomas Scott <mr.thomas.sc...@gmail.com> wrote: > I've seen ASR920s do a Y.1564 test over L2, but never an L3 iPerf test. > Are you attempting to prove (or disprove) a circuit? > > Some digging shows this document Y.1564 Capabilities of ASR920 (cisco.com) > <https://www.cisco.com/c/dam/en/us/products/collateral/routers/asr-920-series-aggregation-services-router/y1564-capabilities-asr920.pdf> > > > - Thomas Scott | mr.thomas.sc...@gmail.com > > > On Fri, Jan 15, 2021 at 10:04 AM Shawn L <sh...@rmrf.us> wrote: > >> Does anyone know if there's a way to do basic speed testing to / from an >> ASR920? I know you used to be able to use ttcp on some cisco routers to >> do >> basic testing, but it doesn't seem to be available on the 920. >> >> Or, if there's a way to do any sort of link speed testing between 2 >> ASR920s? >> >> I have a circuit that may or may not be performing correctly, but I'd like >> to do some basic testing before I have to send a technician with an >> ethernet tester to do rfc2544 (or Y.1564) tests. >> >> Thanks >> _______________________________________________ >> cisco-nsp mailing list cisco-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/