Hello I'm using cisco ASR1001-X (Cisco IOS XE Software, Version 16.09.05) as LNS.
I'm trying to set-up a QoS class to priorize outgoing trafic (from LNS to the CPE establishing the PPP session) Each time I try to attach the policy-map to the virtual-template I get this error when a PPP session is brought up : %QOS-6-POLICY_INST_FAILED: Service policy installation failed on SSS session identifier 20 -. service-policy not applicable for interface features. policy:parent, dir:OUT, ptype:, ctype:DEFAULT Here's my config : class-map match-any QOS-class-voip match dscp cs3 match dscp ef class-map match-any generic_data match ip dscp default ! policy-map child class QOS-class-voip police cir 10000000 conform-action transmit exceed-action transmit priority class generic_data bandwidth remaining percent 80 policy-map parent class class-default shape average percent 100 service-policy child interface Virtual-Template1 service-policy output parent [...] What am I doing wrong ? Is there a way to do dynamic QoS on virtual-templates ? ( = always priorise a class-map) ? Regards, Cédric _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
