--- Begin Message ---
Easily :) as long as there's not a /24 on 1000 vlans and you have
excess of 150,000 arp entries, things start to get iffy around there but
it still works, just slower
On 7/5/2021 7:20 AM, chiel wrote:
Hi,
I might going to use a 7600 with RSP720 to terminate 1000 users, where
each user has a own vlan and L3. I will also be making a 1000 DHCP
config, one for each vlan.
My question is will the RSP720 have no problem with a 1000 x a DHCP
config? Because the DHCP will be handled by the CPU I guess? I guess
this wont be an issue but just want to check.
Other then a couple of static routes and fiber termination the 7600 will
not be doing anything else.
Chiel
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--- End Message ---
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
