--- Begin Message ---
Moin Gert,
if (neighbor-asn '12731') then
# Announce this one prefix only, if receiving neighbor is in ASN 12731
done
elseif (neighbor-ip '192.168.1.1') then
# Announce this one prefix only, if receiving neighbor is 192.168.1.1
done
endif
Not sure if that is possible (but I can see why you'd want it).
It might be possible by having something like
neigh 192.168.1.1 address-fam ipv6 u route-policy MyPolicy(192.168.1.1) out
... but I'm not sure you can have an IP address there and compare it
to "something". Numbers should work...
https://lukasz.bromirski.net/docs/prezos/2018-IOS-XR-RPL-CLN.pdf
I have actually tried to specify a custom community as a parameter and match against that
in the route-policy's condition but that didn't work with match-any ($community). The
parser wouldn't let me commit that.
Do the RPL variables only work for numbers? Then I wouldnt also assume that something like
match-any (12345:$var) would work?
Cheers
Sascha
--- End Message ---
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
