It was interface mapping issue , G0/0/0/0 is actually G0/0/0/2 Thanks everyone. ________________________________ From: cisco-nsp <[email protected]> on behalf of Mohammad Khalil via cisco-nsp <[email protected]> Sent: Wednesday, December 27, 2023 3:42 PM To: [email protected] <[email protected]> Subject: [c-nsp] Pnet XRV 6.6.2
Greetings I have uploaded image xrv 6.2.2 on pnet for a lab environment and the image booted successfuly. However , I am not able to ping any connected neighbor on any interface though all interfaces are up/up. Interface IP-Address Status Protocol Vrf-Name Loopback0 10.1.100.3 Up Up default MgmtEth0/0/CPU0/0 unassigned Shutdown Down default GigabitEthernet0/0/0/0 10.1.13.3 Up Up default GigabitEthernet0/0/0/1 10.1.35.3 Up Up default GigabitEthernet0/0/0/2 10.1.23.3 Up Up default GigabitEthernet0/0/0/3 unassigned Shutdown Down default GigabitEthernet0/0/0/4 unassigned Shutdown Down default GigabitEthernet0/0/0/5 unassigned Shutdown Down default Is there anything I should do to resolve this? Appreciated. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
