Hi Mohammad, XR requires the PE to have a /32 route towards the directly connected CE. This will enable MPLS on the interface.
PE3: router static vrf CORE address-family ipv4 unicast 172.16.23.2/32 <physical interface towards CE2> The same thing needs to be done on PE6 towards CE7. One more thing. You should specify the update-source on both CE2 and CE7. For instance on CE2: neighbor 10.1.100.7 update-source lo0 Regards, Harold De : cisco-nsp <[email protected]> de la part de Mohammad Khalil via cisco-nsp <[email protected]> Date : vendredi, 19 janvier 2024 à 06:00 À : [email protected] <[email protected]> Objet : [c-nsp] C2C ASR9K Greetings I am trying to configure C2C with BGP as the PE-CE routing protocol and Static as the C to CE routing protocol. The main issue am running now is the eBGP session (VPNv4) between the CEs , routes are delivered but there is no connectivity and hence the eBGP session is not coming up. Per my understanding , the BGP should be labelled unicast between the PE (XRV 6.6.2) and the respective CE. Before i changed the BGP session from IPv4 unicast to labeled unicast it was working (CE to CE traffic) , when I moved to the C traffic , I had to change the BGP to labeled unicast. C1 – CE2 – PE3 – P4 – P5 – PE6 – CE7 – C8 PE3: router bgp 100 address-family ipv4 unicast ! address-family vpnv4 unicast ! neighbor 10.1.100.6 remote-as 100 update-source Loopback0 address-family vpnv4 unicast vrf CORE rd 100:1 address-family ipv4 unicast allocate-label all ! neighbor 172.16.23.2 remote-as 10 address-family ipv4 labeled-unicast route-policy ALLOW in route-policy ALLOW out CE2: router bgp 10 bgp log-neighbor-changes no bgp default ipv4-unicast neighbor 10.1.100.7 remote-as 7 neighbor 10.1.100.7 ebgp-multihop 5 neighbor 172.16.23.3 remote-as 100 ! address-family ipv4 network 10.1.100.2 mask 255.255.255.255 neighbor 172.16.23.3 activate neighbor 172.16.23.3 send-label exit-address-family ! address-family vpnv4 neighbor 10.1.100.7 activate neighbor 10.1.100.7 send-community extended exit-address-family ! address-family ipv4 vrf CUST redistribute static exit-address-family Nothing on the C except for a default route , is there anything I am missing? LDP is functioning well along the path. Appreciated. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
