Yes, I am trying to provision some new EVPN services while keeping the
existing bridge-domains for local switching between vlans in place.
On 02/02/2024 13:11, Catalin Dominte wrote:
Are you trying to migrate to EVPN? What are you trying to achieve? :)
Catalin
------------------------------------------------------------------------
*From:* cisco-nsp <[email protected]> on behalf of Mihai
via cisco-nsp <[email protected]>
*Sent:* Friday, February 2, 2024 1:05:12 PM
*To:* [email protected] <[email protected]>
*Subject:* [c-nsp] Local switching on EVPN port
Hi,
On Cisco NCS I can configure local switching between two
subinterfaces/vlans by adding them to a bridge domain as below:
l2vpn bridge group X bridge-domain X interface Bundle-Ether1.10
l2vpn bridge group X bridge-domain X interface Bundle-Ether1.20
Once I enable EVPN on the physical interface/bundle the local switching
no longer works.
I kinda understand why it wouldn't work with EVPN but is there some knob
that I can enable in order to preserve the functionality?
Thanks!
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
<https://puck.nether.net/mailman/listinfo/cisco-nsp>
archive at http://puck.nether.net/pipermail/cisco-nsp/
<http://puck.nether.net/pipermail/cisco-nsp/>
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
