I have a simple iBGP peer defined as follows:
neighbor 128.139.197.146
remote-as 378
update-source Loopback0
address-family ipv4 unicast
I have a GigE interface defined as:
interface GigabitEthernet0/0/0/43.1
ipv4 address 192.0.2.1 255.255.255.0
encapsulation dot1q 1
This iBGP peer feeds me /32s with nexthop set as 192.0.2.1/32. Problem
is all routes disappear.
Neighbor Spk AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down
St/PfxRcd
128.139.197.146 0 378 10437 627880 10060119 0 0
00:15:41 0
If the feed sets the IP to 192.0.2.2 then the BGP routes appear in the
routing table. If I then change the IP address on interface
GigabitEthernet0/0/0/43.1 to 192.0.2.2 then the routes disappear as well
after having made it into the routing table.
I am obviously missing something very simple. Clue-bat welcome.
Thanks,
Hank
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
