Send cisco-voip mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of cisco-voip digest..."
Today's Topics:
1. Re: CUP 8.6 calendar integration (Roger Wiklund)
2. Re: CUP 8.6 calendar integration (Erick)
3. Re: 9971 Load sip9971.9-3-1-33 and voice vlan (Erick B.)
4. Re: 9971 Load sip9971.9-3-1-33 and voice vlan (Garrett Skjelstad)
5. Re: CUP 8.6 calendar integration (Roger Wiklund)
6. Re: Jabber 9.0.5 no photos in Windows XP (Roger Wiklund)
----------------------------------------------------------------------
Message: 1
Date: Sun, 30 Sep 2012 19:14:07 +0200
From: Roger Wiklund <[email protected]>
To: Mike Lydick <[email protected]>
Cc: [email protected]
Subject: Re: [cisco-voip] CUP 8.6 calendar integration
Message-ID:
<CAC+aSK0=R-7AsVcz4WESn5JXEq4=sk5yneujh-pumzybgb+...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
>From the Cisco guy:
The following command can be run on a per user basis from the CLI.
execute procedure spSetUserCalendaring((select pkid from enduser where
userid='"coflaher"),'t','t')
If that works then thats at least acceptable, currently there is no
way for an admin to enable it.
/Roger
On Sun, Sep 30, 2012 at 3:26 AM, Mike Lydick <[email protected]> wrote:
> Hmm conflicting information in the support threads listed.
>
> Seems to have worked with the accounts we tested.
>
> From the thread it looks like it may work but other changes can overwrite
> the setting.
>
>
> https://supportforums.cisco.com/thread/2167417
>
>
> Best Regards,
>
> Mike Lydick
>
>
>
>
>
> On Sat, Sep 29, 2012 at 12:26 PM, Roger Wiklund <[email protected]>
> wrote:
>>
>> Think twice before you change it via the CLI.
>>
>> https://supportforums.cisco.com/thread/2035926
>>
>>
>> On Fri, Sep 28, 2012 at 6:56 PM, Mike Lydick <[email protected]>
>> wrote:
>> > not from the Admin page but did you try the sql update method?
>> >
>> > run sql update enduser set enablecalendarpresence='t'
>> >
>> >
>> > Best Regards,
>> >
>> > Mike Lydick
>> >
>> >
>> >
>> >
>> > On Fri, Sep 28, 2012 at 12:02 PM, Erick Wellnitz
>> > <[email protected]>
>> > wrote:
>> >>
>> >> Is there a way to globally enable calendar integration for all users or
>> >> a
>> >> way to do it from the admin page?
>> >>
>> >> _______________________________________________
>> >> cisco-voip mailing list
>> >> [email protected]
>> >> https://puck.nether.net/mailman/listinfo/cisco-voip
>> >>
>> >
>> >
>> > _______________________________________________
>> > cisco-voip mailing list
>> > [email protected]
>> > https://puck.nether.net/mailman/listinfo/cisco-voip
>> >
>
>
------------------------------
Message: 2
Date: Sun, 30 Sep 2012 13:46:02 -0500
From: Erick <[email protected]>
To: Roger Wiklund <[email protected]>
Cc: "[email protected]" <[email protected]>
Subject: Re: [cisco-voip] CUP 8.6 calendar integration
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii
Could it be done through the cup api like with axl for cucm?
We're in a tiugh spot where if we can't prove cup/jabber is where we need to go
we will be forced into the nightmare that is integrating cisco and lync.
On Sep 30, 2012, at 12:14 PM, Roger Wiklund <[email protected]> wrote:
> From the Cisco guy:
>
> The following command can be run on a per user basis from the CLI.
> execute procedure spSetUserCalendaring((select pkid from enduser where
> userid='"coflaher"),'t','t')
>
> If that works then thats at least acceptable, currently there is no
> way for an admin to enable it.
>
> /Roger
>
> On Sun, Sep 30, 2012 at 3:26 AM, Mike Lydick <[email protected]> wrote:
>> Hmm conflicting information in the support threads listed.
>>
>> Seems to have worked with the accounts we tested.
>>
>> From the thread it looks like it may work but other changes can overwrite
>> the setting.
>>
>>
>> https://supportforums.cisco.com/thread/2167417
>>
>>
>> Best Regards,
>>
>> Mike Lydick
>>
>>
>>
>>
>>
>> On Sat, Sep 29, 2012 at 12:26 PM, Roger Wiklund <[email protected]>
>> wrote:
>>>
>>> Think twice before you change it via the CLI.
>>>
>>> https://supportforums.cisco.com/thread/2035926
>>>
>>>
>>> On Fri, Sep 28, 2012 at 6:56 PM, Mike Lydick <[email protected]>
>>> wrote:
>>>> not from the Admin page but did you try the sql update method?
>>>>
>>>> run sql update enduser set enablecalendarpresence='t'
>>>>
>>>>
>>>> Best Regards,
>>>>
>>>> Mike Lydick
>>>>
>>>>
>>>>
>>>>
>>>> On Fri, Sep 28, 2012 at 12:02 PM, Erick Wellnitz
>>>> <[email protected]>
>>>> wrote:
>>>>>
>>>>> Is there a way to globally enable calendar integration for all users or
>>>>> a
>>>>> way to do it from the admin page?
>>>>>
>>>>> _______________________________________________
>>>>> cisco-voip mailing list
>>>>> [email protected]
>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> [email protected]
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>
>>
------------------------------
Message: 3
Date: Mon, 1 Oct 2012 00:00:43 -0500
From: "Erick B." <[email protected]>
To: "Jason Aarons (AM)" <[email protected]>
Cc: "cisco-voip \([email protected]\)"
<[email protected]>
Subject: Re: [cisco-voip] 9971 Load sip9971.9-3-1-33 and voice vlan
Message-ID:
<CAHSnBQw2soAosU8bKwmcDp6mhqaTPGwTH9Se=qh021zjmx-...@mail.gmail.com>
Content-Type: text/plain; charset=windows-1252
Hmm. Interesting.
Have you tried this with a 7900 series phone for comparison?
What model power injector?
Try doing a packet capture on both sides of injector and see if the
VLAN headers are being stripped of injector is rewriting packet and
not just adding PoE.
I don't have any PoE injectors handy else would try on 9971s we use.
We use ours on Wifi w/power cubes if PoE not available.
On Thu, Sep 27, 2012 at 4:56 PM, Jason Aarons (AM)
<[email protected]> wrote:
> So, we discovered that if you power up a 9971 with external power (injector)
> and connect it to the switching, it doesn?t honor the Cisco voice VLAN, and
> jumps on the ?access vlan? of the port instead. Meaning, it does a DHCP and
> gets our standard user data network of 10.20.164.0/23 instead of the
> endpoint segment of 10.20.170.0/24
>
>
> The switch still identifies the phone as a Cisco IP Phone:
>
>
> Sep 27 14:54:36 MDT: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone
> detected on port Gi1/0/9, port's configured trust state is now operational.
>
>
> However, if you let it draw PoE, it boots normally and places the phone on
> the voice VLAN and the PC on the data VLAN.
>
>
>
> Is there something misconfigured in the switching? Why would the phone not
> jump on the voice VLAN regardless of power source?
>
>
>
> Phone load is sip9971.9-3-1-33
------------------------------
Message: 4
Date: Sun, 30 Sep 2012 22:42:01 -0700
From: Garrett Skjelstad <[email protected]>
To: "Erick B." <[email protected]>
Cc: "cisco-voip \([email protected]\)"
<[email protected]>
Subject: Re: [cisco-voip] 9971 Load sip9971.9-3-1-33 and voice vlan
Message-ID: <[email protected]>
Content-Type: text/plain; charset=utf-8
What is the switch IOS revision?
Sent from my iPhone
On Sep 30, 2012, at 22:00, "Erick B." <[email protected]> wrote:
> Hmm. Interesting.
>
> Have you tried this with a 7900 series phone for comparison?
> What model power injector?
>
> Try doing a packet capture on both sides of injector and see if the
> VLAN headers are being stripped of injector is rewriting packet and
> not just adding PoE.
>
> I don't have any PoE injectors handy else would try on 9971s we use.
> We use ours on Wifi w/power cubes if PoE not available.
>
>
> On Thu, Sep 27, 2012 at 4:56 PM, Jason Aarons (AM)
> <[email protected]> wrote:
>> So, we discovered that if you power up a 9971 with external power (injector)
>> and connect it to the switching, it doesn?t honor the Cisco voice VLAN, and
>> jumps on the ?access vlan? of the port instead. Meaning, it does a DHCP and
>> gets our standard user data network of 10.20.164.0/23 instead of the
>> endpoint segment of 10.20.170.0/24
>>
>>
>> The switch still identifies the phone as a Cisco IP Phone:
>>
>>
>> Sep 27 14:54:36 MDT: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone
>> detected on port Gi1/0/9, port's configured trust state is now operational.
>>
>>
>> However, if you let it draw PoE, it boots normally and places the phone on
>> the voice VLAN and the PC on the data VLAN.
>>
>>
>>
>> Is there something misconfigured in the switching? Why would the phone not
>> jump on the voice VLAN regardless of power source?
>>
>>
>>
>> Phone load is sip9971.9-3-1-33
>
> _______________________________________________
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
------------------------------
Message: 5
Date: Mon, 1 Oct 2012 15:52:47 +0200
From: Roger Wiklund <[email protected]>
To: Erick <[email protected]>
Cc: "[email protected]" <[email protected]>
Subject: Re: [cisco-voip] CUP 8.6 calendar integration
Message-ID:
<CAC+aSK02=3ks+awb7ckc6-vpodpiret5_76bxi1_qeso011...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
This command works for me on 8.6.4.11900-1:
run sql execute procedure spSetUserCalendaring((select pkid from
enduser where userid='roger'),'t','t')
I got confirmation from a Cisco guy that this is a supported way of
enabling it. Even though you have to do one user at a time.
/Roger
On Sun, Sep 30, 2012 at 8:46 PM, Erick <[email protected]> wrote:
> Could it be done through the cup api like with axl for cucm?
>
> We're in a tiugh spot where if we can't prove cup/jabber is where we need to
> go we will be forced into the nightmare that is integrating cisco and lync.
>
> On Sep 30, 2012, at 12:14 PM, Roger Wiklund <[email protected]> wrote:
>
>> From the Cisco guy:
>>
>> The following command can be run on a per user basis from the CLI.
>> execute procedure spSetUserCalendaring((select pkid from enduser where
>> userid='"coflaher"),'t','t')
>>
>> If that works then thats at least acceptable, currently there is no
>> way for an admin to enable it.
>>
>> /Roger
>>
>> On Sun, Sep 30, 2012 at 3:26 AM, Mike Lydick <[email protected]> wrote:
>>> Hmm conflicting information in the support threads listed.
>>>
>>> Seems to have worked with the accounts we tested.
>>>
>>> From the thread it looks like it may work but other changes can overwrite
>>> the setting.
>>>
>>>
>>> https://supportforums.cisco.com/thread/2167417
>>>
>>>
>>> Best Regards,
>>>
>>> Mike Lydick
>>>
>>>
>>>
>>>
>>>
>>> On Sat, Sep 29, 2012 at 12:26 PM, Roger Wiklund <[email protected]>
>>> wrote:
>>>>
>>>> Think twice before you change it via the CLI.
>>>>
>>>> https://supportforums.cisco.com/thread/2035926
>>>>
>>>>
>>>> On Fri, Sep 28, 2012 at 6:56 PM, Mike Lydick <[email protected]>
>>>> wrote:
>>>>> not from the Admin page but did you try the sql update method?
>>>>>
>>>>> run sql update enduser set enablecalendarpresence='t'
>>>>>
>>>>>
>>>>> Best Regards,
>>>>>
>>>>> Mike Lydick
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Fri, Sep 28, 2012 at 12:02 PM, Erick Wellnitz
>>>>> <[email protected]>
>>>>> wrote:
>>>>>>
>>>>>> Is there a way to globally enable calendar integration for all users or
>>>>>> a
>>>>>> way to do it from the admin page?
>>>>>>
>>>>>> _______________________________________________
>>>>>> cisco-voip mailing list
>>>>>> [email protected]
>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> cisco-voip mailing list
>>>>> [email protected]
>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>
>>>
>>>
------------------------------
Message: 6
Date: Mon, 1 Oct 2012 17:11:40 +0200
From: Roger Wiklund <[email protected]>
To: Justin Steinberg <[email protected]>
Cc: Cisco VOIP <[email protected]>
Subject: Re: [cisco-voip] Jabber 9.0.5 no photos in Windows XP
Message-ID:
<CAC+aSK0zcLUBP2y0+vORBUJw3rj__yWPW=4r-cwr7dlshc8...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Look's like we are hitting bug CSCua68881.
Symptom:
Cisco Jabber for Windows is not able to display contact photos
Conditions:
The file path name that the picture is trying to be saved to contains
a letter from the Spanish alphabet.
Workaround:
None
On Wed, Sep 26, 2012 at 11:48 AM, Roger Wiklund <[email protected]> wrote:
> Strange, it works on an English Windows XP but not on a Swedish one...
>
> On Tue, Sep 25, 2012 at 5:51 PM, Justin Steinberg <[email protected]>
> wrote:
>> Same as you, UDS with web retrieval.
>>
>> Here is my jabber directory config:
>>
>> <Directory>
>> <DirectoryServerType>UDS</DirectoryServerType><br/>
>> <PhotoUriSubstitutionEnabled>true</PhotoUriSubstitutionEnabled>
>> <PhotoUriWithToken>http://media.company.com/images/IntranetPhotos/%%uid%%.jpg</PhotoUriWithToken>
>> </Directory>
>>
>>
>>
>> On Tue, Sep 25, 2012 at 11:25 AM, Roger Wiklund <[email protected]>
>> wrote:
>>>
>>> I tried this on version 9.0.1 and it was the same problem.
>>> There is no Photo folder in CSF, only Config, Credentials and
>>> CustomEmoticons, all empty.
>>>
>>> I'm logged in as Admin. I've tried it on three different XP machines,
>>> one on domain, the others standalone, always the same problem.
>>>
>>> How are you fetching your contact photos?
>>>
>>> /Roger
>>>
>>> On Tue, Sep 25, 2012 at 4:41 PM, Justin Steinberg <[email protected]>
>>> wrote:
>>> > in the home directory there is a (documents & settings) in XP, there is
>>> > a
>>> > cisco > unified communications > jabber > csf > photos folder. Perhaps
>>> > there is a filesystem permissions problem ?
>>> >
>>> > Did this work with clients prior to 9.0.5 ? I have not seen this
>>> > problem
>>> > on previous versions with XP.
>>> >
>>> >
>>> > On Tue, Sep 25, 2012 at 10:18 AM, Roger Wiklund
>>> > <[email protected]>
>>> > wrote:
>>> >>
>>> >> I have a problem with contact photos Jabber when running Windows XP.
>>> >> It works fine in Windows 7.
>>> >>
>>> >> Jabber 9.0.5
>>> >> CUPS 8.6.4.11900-1
>>> >> CUCM 8.6.2.20000-2
>>> >>
>>> >> I'm running UDS mode and fething the photos from a webserver.
>>> >>
>>> >> <Directory>
>>> >> <DirectoryServerType>UDS</DirectoryServerType>
>>> >>
>>> >>
>>> >> <PhotoUriWithToken>https://www.webserver.se/jabber/%%uid%%.jpg</PhotoUriWithToken>
>>> >> </Directory>
>>> >>
>>> >> Any tips?
>>> >> _______________________________________________
>>> >> cisco-voip mailing list
>>> >> [email protected]
>>> >> https://puck.nether.net/mailman/listinfo/cisco-voip
>>> >
>>> >
>>
>>
------------------------------
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
End of cisco-voip Digest, Vol 108, Issue 1
******************************************
