Send cisco-voip mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of cisco-voip digest..."
Today's Topics:
1. Re: Sweden Dial Plan. Overlap sending? (Roger Wiklund)
2. Re: Sweden Dial Plan. Overlap sending? (Roger Wiklund)
3. Hardware Setup Failed on 7828 after 9.1 Upgrade
(Matthew Loraditch)
4. Re: ATA-187 and Ground? (Jason Aarons (AM)) (Mike King)
----------------------------------------------------------------------
Message: 1
Date: Mon, 26 Aug 2013 13:43:09 +0200
From: Roger Wiklund <[email protected]>
To: Nate VanMaren <[email protected]>
Cc: cisco voip <[email protected]>
Subject: Re: [cisco-voip] Sweden Dial Plan. Overlap sending?
Message-ID:
<cac+ask3k0sva9apoiqfjkasscpdczxkjjpfcf0nzljh_n_p...@mail.gmail.com>
Content-Type: text/plain; charset="windows-1252"
Hey
I'm from Sweden and you are right about our dial-plan, it's open and
variable lenght. Almost all of our installations are based on very simple
patterns that overlaps and we rely on inter-digit timeout. T302 = 3
seconds. Most customers are OK with that, and alot of calls are to mobile
phones that have fixed lenght. 07[0237]XXXXXXX.
If you have ISDN PRI from any major telco in Sweden they support overlap
sending. Call forward does not work with overlap sending as you might know,
so you have to make some extra RPs and CCS/PTs f?r call forward.
/Roger
On Fri, Aug 23, 2013 at 5:04 PM, Nate VanMaren <[email protected]>wrote:
> Group,****
>
> ** **
>
> I am deploying a site in Sweden and looking at the dial plan, I don?t see
> any way to create patterns that do not have inter-digit timeout, because
> almost every area code has different sized minimum and maximum length (
> http://www.pts.se/upload/Ovrigt/Tele/Nummerfragor/Sv_nrplan_telefoni_enl_TU-T_rek_E.164.pdf
> )****
>
> ** **
>
> I have done overlap sending to the PSTN in Germany because their dial-plan
> is also impossible to load in CM, so I am thinking maybe Sweden also uses
> overlap sending?.****
>
> ** **
>
> Does anyone on the group have experience with the Sweden dial plan, or
> know if Sweden does overlap sending?****
>
> ** **
>
> Thanks,****
>
> -Nate****
>
>
>
> NOTICE: This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged information. Any
> unauthorized review, use, disclosure or distribution is prohibited. If you
> are not the intended recipient, please contact the sender by reply email
> and destroy all copies of the original message.****
>
>
> _______________________________________________
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20130826/3b20da74/attachment-0001.html>
------------------------------
Message: 2
Date: Mon, 26 Aug 2013 14:31:04 +0200
From: Roger Wiklund <[email protected]>
To: Nate VanMaren <[email protected]>
Cc: cisco voip <[email protected]>
Subject: Re: [cisco-voip] Sweden Dial Plan. Overlap sending?
Message-ID:
<CAC+aSK2ZmTB2MRQ2KOWh1SX_8N=gqk3awjvsjjzudv-qz2i...@mail.gmail.com>
Content-Type: text/plain; charset="windows-1252"
Regarding the CF thingy, I was referring to this document:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008012f948.shtml
It's for 3.x =) but we had the same problem for 8.6.
On Mon, Aug 26, 2013 at 1:43 PM, Roger Wiklund <[email protected]>wrote:
> Hey
>
> I'm from Sweden and you are right about our dial-plan, it's open and
> variable lenght. Almost all of our installations are based on very simple
> patterns that overlaps and we rely on inter-digit timeout. T302 = 3
> seconds. Most customers are OK with that, and alot of calls are to mobile
> phones that have fixed lenght. 07[0237]XXXXXXX.
>
> If you have ISDN PRI from any major telco in Sweden they support overlap
> sending. Call forward does not work with overlap sending as you might know,
> so you have to make some extra RPs and CCS/PTs f?r call forward.
>
> /Roger
>
>
> On Fri, Aug 23, 2013 at 5:04 PM, Nate VanMaren
> <[email protected]>wrote:
>
>> Group,****
>>
>> ** **
>>
>> I am deploying a site in Sweden and looking at the dial plan, I don?t see
>> any way to create patterns that do not have inter-digit timeout, because
>> almost every area code has different sized minimum and maximum length (
>> http://www.pts.se/upload/Ovrigt/Tele/Nummerfragor/Sv_nrplan_telefoni_enl_TU-T_rek_E.164.pdf
>> )****
>>
>> ** **
>>
>> I have done overlap sending to the PSTN in Germany because their
>> dial-plan is also impossible to load in CM, so I am thinking maybe Sweden
>> also uses overlap sending?.****
>>
>> ** **
>>
>> Does anyone on the group have experience with the Sweden dial plan, or
>> know if Sweden does overlap sending?****
>>
>> ** **
>>
>> Thanks,****
>>
>> -Nate****
>>
>>
>>
>> NOTICE: This email message is for the sole use of the intended
>> recipient(s) and may contain confidential and privileged information. Any
>> unauthorized review, use, disclosure or distribution is prohibited. If you
>> are not the intended recipient, please contact the sender by reply email
>> and destroy all copies of the original message.****
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> [email protected]
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20130826/c465d416/attachment-0001.html>
------------------------------
Message: 3
Date: Mon, 26 Aug 2013 13:27:19 +0000
From: Matthew Loraditch <[email protected]>
To: "[email protected]" <[email protected]>
Subject: [cisco-voip] Hardware Setup Failed on 7828 after 9.1 Upgrade
Message-ID:
<[email protected]>
Content-Type: text/plain; charset="us-ascii"
7828-I4 - Did a 9.1 upgrade. On switch version machine hung at Hardware Setup
Failed, was able to press a key and continue and upgrade was successful. Opened
a TAC case as I wanted to make sure this wasn't going to reoccur on subsequent
reboots. TAC couldn't find any logs indicating what the problem was and the
server reports everything healthy.
Anyone seen this before?
Matthew G. Loraditch - CCNP-Voice, CCNA-R&S, CCDA
1965 Greenspring Drive
Timonium, MD 21093
voice. 410.252.8830
fax. 410.252.9284
Twitter<http://twitter.com/heliontech> |
Facebook<http://www.facebook.com/#!/pages/Helion/252157915296> |
Website<http://www.heliontechnologies.com/> | Email
Support<mailto:[email protected]?subject=Technical%20Support%20Request>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20130826/e2893e5b/attachment-0001.html>
------------------------------
Message: 4
Date: Mon, 26 Aug 2013 11:12:35 -0400
From: Mike King <[email protected]>
Cc: "[email protected]" <[email protected]>
Subject: Re: [cisco-voip] ATA-187 and Ground? (Jason Aarons (AM))
Message-ID:
<cantppk66bzchjdczfzfndiyobtaketct08lh9tpbdl7zd-q...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
One more thing. Check your Lightening protection fuses/breakers. I've had
some that were faulty, and gave inconsistent results. But I think you're
on the correct path of bad cable plant.
On Sat, Aug 24, 2013 at 3:56 PM, Jerry Ridge <[email protected]> wrote:
> It could be that you have a resistive short on the wire. You can test for
> that with a meter or toner. If you notice a toner will
> short and the tone will stop, or the light on the toner may glow dim. It's
> a dumb test but quick and dirty. It may be the tone will be muted still
> there but at a low volume.
>
> The other thing that could cause this is capacitance on the wire. The only
> way I have seen that removed is with something called a load pot, which is
> a coil to ground.
>
> It could be your wire is in water and needs to be direct burial type of
> wire or jelly filled.
>
> If you had a ground on the line you would hear a hum. If you have a bad
> ground at the power suppy or a bad filter in the power supply you will hear
> a hum.
>
> The way to test for capacitance is with an analog meter and when you hook
> it up or revers the leads you will see the meter kick.
>
> You could try replacing the ATA with a known good one and see if the ATA
> is doing it, itself.
>
>
> JeRy
>
> _______________________________________________
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20130826/8f8fe2c4/attachment-0001.html>
------------------------------
Subject: Digest Footer
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
------------------------------
End of cisco-voip Digest, Vol 118, Issue 23
*******************************************
