Send cisco-voip mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of cisco-voip digest..."
Today's Topics:
1. Re: Router as H323 GW and also as SIP GW (Anthony Holloway)
2. Re: Router as H323 GW and also as SIP GW (Anthony Holloway)
3. Re: iPad console cable (Erick Wellnitz)
4. Re: iPad console cable (Mark Holloway)
5. Re: iPad console cable (Mark Holloway)
6. Re: iPad console cable (Madziarczyk, Jonathan)
7. Re: iPad console cable (Garrett Skjelstad)
8. Re: iPad console cable (Adam Blomfield)
9. Re: iPad console cable (Erick Wellnitz)
----------------------------------------------------------------------
Message: 1
Date: Tue, 1 Oct 2013 12:35:15 -0500
From: Anthony Holloway <[email protected]>
To: vignesh sethuraman <[email protected]>
Cc: "[email protected]" <[email protected]>
Subject: Re: [cisco-voip] Router as H323 GW and also as SIP GW
Message-ID:
<cacrcjohdy+_he6mtqp7jdffkesawurqxgkannjmmrzdxp6r...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
A voice gateway has H.323 enabled by default, and as such, your voip
dialpeers are H323 unless you tell it otherwise.
How you switch from H323 to SIP on a per dialpeer basis, is with the
dialpeer command: session protocol sipv2
By doing it per dialpeer you are able to run in a mixed SIP/H323
environment.
If you're going from TDM to SIP on your 7206, then that is all you need.
If you are doing H323 to SIP or SIP to SIP then you'll need the appropriate
allow connection commands under voice service voip. But since you
mentioned CUBE, I assume you're already familiar with these commands.
On Tue, Oct 1, 2013 at 10:21 AM, vignesh sethuraman <
[email protected]> wrote:
> Hello Experts,
>
> I have a 7206 router acting as H323 GW registered to a CUCM. Along with
> that, I need to create a SIP trunk on the same router to a CUBE.
>
> Please let me know if it is possible or not. And also do let me know if
> something needs to be taken care.
>
> Thanks,
> Viki
>
> _______________________________________________
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20131001/3531d292/attachment-0001.html>
------------------------------
Message: 2
Date: Tue, 1 Oct 2013 12:52:47 -0500
From: Anthony Holloway <[email protected]>
To: vignesh sethuraman <[email protected]>
Cc: "[email protected]" <[email protected]>
Subject: Re: [cisco-voip] Router as H323 GW and also as SIP GW
Message-ID:
<cacrcjogggvhzt7siyw9d_1+o_tukpl-xxcwe-ed+3hoq81h...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
I should have been more clear that there are a number of other commands you
should configure on your gateway as it pertains to SIP best practices and
interoperability, however I was simply stating the bare minimum command to
switch the protocol from H323 to SIP.
Example of other commands you may want to look into (not a comprehensive
list):
voice service voip
sip
bind control source-interface <your interface>
bind media source-interface <your interface>
dial-peer voice XXX voip
dtmf-relay sip-notify rtp-nte digit-drop
Also, if you need to tweak SIP timers or retry counters you will need to
use the: sip-au section and then use the: session target sip-server command.
Hope that helps.
On Tue, Oct 1, 2013 at 12:35 PM, Anthony Holloway <
[email protected]> wrote:
> A voice gateway has H.323 enabled by default, and as such, your voip
> dialpeers are H323 unless you tell it otherwise.
>
> How you switch from H323 to SIP on a per dialpeer basis, is with the
> dialpeer command: session protocol sipv2
>
> By doing it per dialpeer you are able to run in a mixed SIP/H323
> environment.
>
> If you're going from TDM to SIP on your 7206, then that is all you need.
> If you are doing H323 to SIP or SIP to SIP then you'll need the appropriate
> allow connection commands under voice service voip. But since you
> mentioned CUBE, I assume you're already familiar with these commands.
>
>
> On Tue, Oct 1, 2013 at 10:21 AM, vignesh sethuraman <
> [email protected]> wrote:
>
>> Hello Experts,
>>
>> I have a 7206 router acting as H323 GW registered to a CUCM. Along with
>> that, I need to create a SIP trunk on the same router to a CUBE.
>>
>> Please let me know if it is possible or not. And also do let me know if
>> something needs to be taken care.
>>
>> Thanks,
>> Viki
>>
>> _______________________________________________
>> cisco-voip mailing list
>> [email protected]
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20131001/f0d84c48/attachment-0001.html>
------------------------------
Message: 3
Date: Tue, 1 Oct 2013 14:05:17 -0500
From: Erick Wellnitz <[email protected]>
To: Mark Holloway <[email protected]>
Cc: cisco-voip <[email protected]>
Subject: Re: [cisco-voip] iPad console cable
Message-ID:
<cak0wosdb4ghxceeejv5nncc_e7ap284ohfhdszkuefzsnqp...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Nice having reports that it does work.
I'll have to treat myself to this and the app once our next project kicks
off.
On Tue, Oct 1, 2013 at 1:42 PM, Mark Holloway <[email protected]> wrote:
> A little pricey but yes it's awesome and works great.
>
> On Oct 1, 2013, at 11:29 AM, Erick Wellnitz <[email protected]>
> wrote:
>
> I like to share ineresting products which have the potential to make our
> lives as engineers easier. Not sure how many iPad users we have here but I
> found the following product interesting.
>
> It is a Cisco console cable built for the iPad/iPhone. They also have a
> models with the lightning connector and with a standard DB9 serial
> connector instead of the rj-45 cisco console connector.
>
> In companies that use Citrix extensively for remote access, this product
> might enable one to ditch the laptop in favor of a lighter device. This
> may be very interesting to those who travel a lot for their company or
> clients.
>
>
> http://www.cyberguys.com/product-details/?productid=63318&core_cross=SEARCH_DETAIL_SIMILAR
>
>
> _______________________________________________
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20131001/2bb9d0cc/attachment-0001.html>
------------------------------
Message: 4
Date: Tue, 1 Oct 2013 14:42:42 -0400
From: Mark Holloway <[email protected]>
To: Erick Wellnitz <[email protected]>
Cc: cisco-voip <[email protected]>
Subject: Re: [cisco-voip] iPad console cable
Message-ID: <[email protected]>
Content-Type: text/plain; charset="iso-8859-1"
A little pricey but yes it's awesome and works great.
On Oct 1, 2013, at 11:29 AM, Erick Wellnitz <[email protected]> wrote:
> I like to share ineresting products which have the potential to make our
> lives as engineers easier. Not sure how many iPad users we have here but I
> found the following product interesting.
>
> It is a Cisco console cable built for the iPad/iPhone. They also have a
> models with the lightning connector and with a standard DB9 serial connector
> instead of the rj-45 cisco console connector.
>
> In companies that use Citrix extensively for remote access, this product
> might enable one to ditch the laptop in favor of a lighter device. This may
> be very interesting to those who travel a lot for their company or clients.
>
> http://www.cyberguys.com/product-details/?productid=63318&core_cross=SEARCH_DETAIL_SIMILAR
>
>
> _______________________________________________
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20131001/2a600340/attachment-0001.html>
------------------------------
Message: 5
Date: Tue, 1 Oct 2013 15:11:01 -0400
From: Mark Holloway <[email protected]>
To: Erick Wellnitz <[email protected]>
Cc: cisco-voip <[email protected]>
Subject: Re: [cisco-voip] iPad console cable
Message-ID: <[email protected]>
Content-Type: text/plain; charset="iso-8859-1"
The one in the link uses the legacy iPhone connector. Redpark also supports
iPhone 5/5c/5s and the latest iPads.
http://www.redpark.com
On Oct 1, 2013, at 3:05 PM, Erick Wellnitz <[email protected]> wrote:
> Nice having reports that it does work.
>
> I'll have to treat myself to this and the app once our next project kicks
> off.
>
>
> On Tue, Oct 1, 2013 at 1:42 PM, Mark Holloway <[email protected]> wrote:
> A little pricey but yes it's awesome and works great.
>
> On Oct 1, 2013, at 11:29 AM, Erick Wellnitz <[email protected]> wrote:
>
>> I like to share ineresting products which have the potential to make our
>> lives as engineers easier. Not sure how many iPad users we have here but I
>> found the following product interesting.
>>
>> It is a Cisco console cable built for the iPad/iPhone. They also have a
>> models with the lightning connector and with a standard DB9 serial connector
>> instead of the rj-45 cisco console connector.
>>
>> In companies that use Citrix extensively for remote access, this product
>> might enable one to ditch the laptop in favor of a lighter device. This may
>> be very interesting to those who travel a lot for their company or clients.
>>
>> http://www.cyberguys.com/product-details/?productid=63318&core_cross=SEARCH_DETAIL_SIMILAR
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> [email protected]
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20131001/dc36e70e/attachment-0001.html>
------------------------------
Message: 6
Date: Tue, 1 Oct 2013 15:11:31 -0500
From: "Madziarczyk, Jonathan" <[email protected]>
To: "Erick Wellnitz" <[email protected]>, "cisco-voip"
<[email protected]>
Subject: Re: [cisco-voip] iPad console cable
Message-ID:
<c5450abe05e1f246b2c0afb201106ec90fb38...@coe-ms1.local.cityofevanston.org>
Content-Type: text/plain; charset="us-ascii"
iPad cables are so 2012...has anyone had luck with Bluetooth serial
adapters (also 2012)?
From: cisco-voip [mailto:[email protected]] On Behalf
Of Erick Wellnitz
Sent: Tuesday, October 01, 2013 10:29 AM
To: cisco-voip
Subject: [cisco-voip] iPad console cable
I like to share ineresting products which have the potential to make our
lives as engineers easier. Not sure how many iPad users we have here
but I found the following product interesting.
It is a Cisco console cable built for the iPad/iPhone. They also have a
models with the lightning connector and with a standard DB9 serial
connector instead of the rj-45 cisco console connector.
In companies that use Citrix extensively for remote access, this product
might enable one to ditch the laptop in favor of a lighter device. This
may be very interesting to those who travel a lot for their company or
clients.
http://www.cyberguys.com/product-details/?productid=63318&core_cross=SEA
RCH_DETAIL_SIMILAR
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20131001/a3312d8f/attachment-0001.html>
------------------------------
Message: 7
Date: Tue, 1 Oct 2013 14:13:25 -0700
From: Garrett Skjelstad <[email protected]>
To: "Madziarczyk, Jonathan" <[email protected]>
Cc: cisco-voip <[email protected]>
Subject: Re: [cisco-voip] iPad console cable
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"
SerialIO makes great bluetooth products, used on both Android and iPhone.
Sent from my (old) iPhone5
On Oct 1, 2013, at 13:11, "Madziarczyk, Jonathan" <[email protected]>
wrote:
> iPad cables are so 2012?has anyone had luck with Bluetooth serial adapters
> (also 2012)?
>
>
>
> From: cisco-voip [mailto:[email protected]] On Behalf Of
> Erick Wellnitz
> Sent: Tuesday, October 01, 2013 10:29 AM
> To: cisco-voip
> Subject: [cisco-voip] iPad console cable
>
> I like to share ineresting products which have the potential to make our
> lives as engineers easier. Not sure how many iPad users we have here but I
> found the following product interesting.
>
> It is a Cisco console cable built for the iPad/iPhone. They also have a
> models with the lightning connector and with a standard DB9 serial connector
> instead of the rj-45 cisco console connector.
>
> In companies that use Citrix extensively for remote access, this product
> might enable one to ditch the laptop in favor of a lighter device. This may
> be very interesting to those who travel a lot for their company or clients.
>
> http://www.cyberguys.com/product-details/?productid=63318&core_cross=SEARCH_DETAIL_SIMILAR
>
>
> _______________________________________________
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20131001/f49e29d9/attachment-0001.html>
------------------------------
Message: 8
Date: Tue, 1 Oct 2013 16:48:15 -0500
From: Adam Blomfield <[email protected]>
To: Garrett Skjelstad <[email protected]>
Cc: cisco-voip <[email protected]>
Subject: Re: [cisco-voip] iPad console cable
Message-ID:
<cadhw-ziqaz1gapriznw1nyxzrtwp-0kznso0ru_8wnw-too...@mail.gmail.com>
Content-Type: text/plain; charset="windows-1252"
What bluetooth adapter / software have you used on the iPhone? I'm looking
to replace an older bluetooth device that I've used with my PC and Mac, but
would love the solution to work on my iOS devices also.
On Tue, Oct 1, 2013 at 4:13 PM, Garrett Skjelstad <[email protected]>wrote:
> SerialIO makes great bluetooth products, used on both Android and iPhone.
>
> Sent from my (old) iPhone5
>
> On Oct 1, 2013, at 13:11, "Madziarczyk, Jonathan" <[email protected]>
> wrote:
>
> iPad cables are so 2012?has anyone had luck with Bluetooth serial adapters
> (also 2012)?****
>
> ** **
>
> ** **
>
> ** **
>
> *From:* cisco-voip
> [mailto:[email protected]<[email protected]>]
> *On Behalf Of *Erick Wellnitz
> *Sent:* Tuesday, October 01, 2013 10:29 AM
> *To:* cisco-voip
> *Subject:* [cisco-voip] iPad console cable****
>
> ** **
>
> I like to share ineresting products which have the potential to make our
> lives as engineers easier. Not sure how many iPad users we have here but I
> found the following product interesting.****
>
> ****
>
> It is a Cisco console cable built for the iPad/iPhone. They also have a
> models with the lightning connector and with a standard DB9 serial
> connector instead of the rj-45 cisco console connector.****
>
> ****
>
> In companies that use Citrix extensively for remote access, this product
> might enable one to ditch the laptop in favor of a lighter device. This
> may be very interesting to those who travel a lot for their company or
> clients.****
>
> ****
>
>
> http://www.cyberguys.com/product-details/?productid=63318&core_cross=SEARCH_DETAIL_SIMILAR
> ****
>
> ****
>
> ****
>
> _______________________________________________
>
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20131001/89981b7f/attachment-0001.html>
------------------------------
Message: 9
Date: Tue, 1 Oct 2013 16:51:19 -0500
From: Erick Wellnitz <[email protected]>
To: Garrett Skjelstad <[email protected]>
Cc: cisco-voip <[email protected]>
Subject: Re: [cisco-voip] iPad console cable
Message-ID:
<CAK0wOsCWRdMr04A_wUu8gV+am8ZmB3=by_js0dyijprrupa...@mail.gmail.com>
Content-Type: text/plain; charset="windows-1252"
One more thing to forget to charge or have spare batteries for. ;)
On Tue, Oct 1, 2013 at 4:13 PM, Garrett Skjelstad <[email protected]>wrote:
> SerialIO makes great bluetooth products, used on both Android and iPhone.
>
> Sent from my (old) iPhone5
>
> On Oct 1, 2013, at 13:11, "Madziarczyk, Jonathan" <[email protected]>
> wrote:
>
> iPad cables are so 2012?has anyone had luck with Bluetooth serial adapters
> (also 2012)?****
>
> ** **
>
> ** **
>
> ** **
>
> *From:* cisco-voip
> [mailto:[email protected]<[email protected]>]
> *On Behalf Of *Erick Wellnitz
> *Sent:* Tuesday, October 01, 2013 10:29 AM
> *To:* cisco-voip
> *Subject:* [cisco-voip] iPad console cable****
>
> ** **
>
> I like to share ineresting products which have the potential to make our
> lives as engineers easier. Not sure how many iPad users we have here but I
> found the following product interesting.****
>
> ****
>
> It is a Cisco console cable built for the iPad/iPhone. They also have a
> models with the lightning connector and with a standard DB9 serial
> connector instead of the rj-45 cisco console connector.****
>
> ****
>
> In companies that use Citrix extensively for remote access, this product
> might enable one to ditch the laptop in favor of a lighter device. This
> may be very interesting to those who travel a lot for their company or
> clients.****
>
> ****
>
>
> http://www.cyberguys.com/product-details/?productid=63318&core_cross=SEARCH_DETAIL_SIMILAR
> ****
>
> ****
>
> ****
>
> _______________________________________________
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20131001/e21b2b8b/attachment-0001.html>
------------------------------
Subject: Digest Footer
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
------------------------------
End of cisco-voip Digest, Vol 120, Issue 2
******************************************
