I was actually thinking of Display Original Calling Number on Transfer from Cisco Unity
From: cisco-voip [mailto:[email protected]] On Behalf Of Jason Aarons (AM) Sent: Tuesday, March 11, 2014 11:53 AM To: Erick Wellnitz; cisco-voip Subject: Re: [cisco-voip] strange message notification behavior - UCONN 9.1 Does this match? Test it out after hours. Be great if this Service Parameter could be set for CTI Applications only, or on a per number basis. Service Parameters > Cisco CallManager > Advanced Always Display Original Dialed Number: Required Field This parameter determines whether phones always display the number that the caller originally dialed (which may not match the final connected number). If Cisco CallManager routes the call from the originally dialed number to the connected number using a call forwarding directive, a translation pattern, route pattern, a redirection by a CTI application, or other means, this parameter determines whether the connected number or the originally dialed number is exposed. Note that when the Conference List feature is invoked, the connected number always displays regardless of the setting in this parameter. Valid values specify True (display the originally dialed number) or False (display the connected number). This is a required field. Default: False From: cisco-voip [mailto:[email protected]] On Behalf Of Erick Wellnitz Sent: Tuesday, March 11, 2014 11:27 AM To: cisco-voip Subject: [cisco-voip] strange message notification behavior - UCONN 9.1 I've done some looking but can't seem to find the cause for this one. Call comes in on line A to user A. User B picks up the call on shared lineA. User B transfers caller direct to voicemail. Email notification shows the mesage being from user A. This is the only user this happens to. Nothing is configured different that I can tell. Any ideas? itevomcid
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
