You can http to the phone ip address and check it’s time/timezone, etc. From: cisco-voip [mailto:[email protected]] On Behalf Of Matthew Collins Sent: Monday, March 24, 2014 7:53 AM To: costas georgiou; [email protected] Subject: Re: [cisco-voip] NTP Issue
Hi Costas, I take it you are using 89XX phones? CSCun11142 is a bug, affecting 89XX phones daylight settings. Usually daylight saving is 4th Sunday of march, But this year the last Sunday is the 5th Sunday. Regards Matthew From: cisco-voip [mailto:[email protected]] On Behalf Of costas georgiou Sent: 24 March 2014 11:25 To: [email protected]<mailto:[email protected]> Subject: [cisco-voip] NTP Issue Hi All, I have a CUCM running 8.6.2, I have been informed this morning that some IP phones are 1 hr out of sync. This is happening to a few remote sites. The NTP server is seperate and is looked after by the customer. I have check the CUCM server and get the follwing results which look ok: admin:utils ntp status ntpd (pid 26786) is running... remote refid st t when poll reach delay offset jitter ============================================================================== +10.160.x.x. 10.107.195.1 4 u 572 1024 377 16.743 0.105 0.015 *165.72.x.x .GPS. 1 u 659 1024 377 35.434 -0.071 7.146 synchronised to NTP server (165.72.x.x) at stratum 2 time correct to within 32 ms polling server every 1024 s Current time in UTC is : Mon Mar 24 09:36:02 UTC 2014 Current time in Europe/London is : Mon Mar 24 09:36:02 GMT 2014 Admin: The clock on the routers sjow the same time. Any ideas what could be the problem? Thanks in advance for your help. Regards Costas itevomcid
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
