I brought up a IOS with 15.2.4.M6 box, and setup CallManager 9.1(2) t to send me the DNs 1XXX (some 7965’/9971s with 2001/2002.
I was using these for how-to references; https://www.youtube.com/watch?v=zZtCfoDfh0g and http://pandaeatsbamboo.blogspot.com/2012/04/service-advertisement-framework-saf.html However nothing shows up in the “show voice saf dnDb all”. However if I setup an acl with CallManager’s ip address I see packets hit IOS, etc. What debugs or CCM trace files should I be looking at ? router eigrp VO_SAF_R1 ! service-family ipv4 autonomous-system 1 ! sf-interface FastEthernet0/0 no split-horizon exit-sf-interface ! topology base external-client CUCM-HQ exit-sf-topology exit-service-family ! service-routing xmcp listen ipv4 client username ciscociscocisco password 0 ciscociscocisco domain 1 default ! voice service saf ! channel 1 vrouter VO_SAF_R1 asystem 1 subscribe callcontrol wildcarded SAF-R1show service-routing xmcp clients % No XMCP clients SAF-R1#show service-routing xmcp server XMCP Server listening on port 5050 Socket descriptors: 0 (TCP/IPv4) Connected clients: 0 unauthenticated, 0 total Maximum clients: unlimited Allow-lists: <none> Clients configured: Username "ciscociscocisco", 0 client(s) connected SAF-R1#show eigrp service-family ipv4 neighbor top EIGRP-SFv4 VR(VO_SAF_R1) Topology Table for AS(1)/ID(10.1.5.100) Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply, r - reply Status, s - sia Status P 100:1:34323739.32353635.31370000.0, 1 successors, FD is 327745536 via Connected, Null0 P 100:2:34323739.32353635.31370000.0, 1 successors, FD is 327745536 via Connected, Null0 P 101:2:8E4866E.0.0.10101, 1 successors, FD is 327745536 via Connected, Null0 P 101:2:8E4866E.0.0.10100, 1 successors, FD is 327745536 via Connected, Null0 SAF-R1#show eigrp service-family ipv4 neigh EIGRP-SFv4 VR(VO_SAF_R1) Service-Family Neighbors for AS(1) SAF-R1#show voice saf dnDb all Total no. of patterns in db/max allowed : 0/6000 Patterns classified under dialplans (private/global) : 0/0 Informational/Error stats - Patterns w/ invalid expr detected while add : 0 Patterns duplicated under the same instance : 0 Patterns rejected overall due to max capacity : 0 Attempts to delete a pattern which is invalid : 0 Last successful DB update @ 2014:03:26 20:29:08:243 ******** Private Dialplan Partition ******** - none - ******** Global (E164) Dialplan Partition ******** - none - SAF-R1# From: [email protected] [mailto:[email protected]] On Behalf Of Brian Meade Sent: Wednesday, March 26, 2014 8:21 PM To: Jason Aarons (AM) Cc: cisco-voip ([email protected]) Subject: Re: [cisco-voip] CCD/SAF from CUCM Pub to CUCM Pub (Cluster-Cluster) You have to use an IOS box as a SAF forwarder. You can do ILS directly between clusters to advertise URIs. In 10.0, ILS will let you advertise regular number patterns as well as URIs which makes SAF obsolete. You can always use something like GNS3 if it's just for the lab. Brian On Wed, Mar 26, 2014 at 4:19 PM, Jason Aarons (AM) <[email protected]<mailto:[email protected]>> wrote: CUCM 9.1.2 Can I run SAF/CCD direct from Cluster to Cluster or is the eigrp IOS 15.2 mandatory? Want to lab test it out without a router if possible.. _______________________________________________ cisco-voip mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-voip itevomcid
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
