Remember if you install the COP file on your publisher, you will need to set the default load back to what it currently is, otherwise all phones will try to pull the new code upon reboot.
Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc. | 314-212-1814 PS Engineering: Innovate & Ignite. -----Original Message----- From: cisco-voip [mailto:[email protected]] On Behalf Of Ryan Ratliff (rratliff) Sent: Tuesday, April 08, 2014 9:15 AM To: Reto Gassmann Cc: cisco-voip voyp list Subject: Re: [cisco-voip] update IP Phone firmware The firmware COP files need to be installed on all TFTP servers, or any server that you will potentially want to serve up the firmware via TFTP. -Ryan On Apr 8, 2014, at 7:48 AM, Reto Gassmann <[email protected]> wrote: Hello Group we plan the upgrade of our CUCM 8.0 to 9.1.2 this spring. Now I want to test the new IP Phone firmware on a few phones. I found a cisco document (Upgrade IP Phone Firmware Individually Doc ID: 108090) that describes the steps. However I have a cluster with 8 CUCM servers. Do I have to install the IP Phone load upgrade patch file (cmterm-7940-7960-sccp.8-1-2SR2.cop.sgn) on every server or just on the publisher / tftp (are on the same server installed)? Thanks for help Regards Reto _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
