That only shows the correct one. The strange part is that only two of the phones have behaved in this way. The others updated and worked as expected.
The users are unerstanding. We'll swap the phone and troubleshoot the problematic one as time permits. On Tue, Apr 8, 2014 at 11:18 AM, Brian Meade <[email protected]> wrote: > I'd try running this on each node and see if your MTP is still showing up > anywhere: > run sql select name from device where istrustedrelaypoint = 't' > > > On Tue, Apr 8, 2014 at 12:11 PM, Brian Meade <[email protected]> wrote: > >> Could be replication problems. I'd check the CCM traces when the TRP is >> allocated and see if it is indeed thinking it's still a valid TRP. If the >> database is good on all nodes, might require a CallManager service restart. >> >> >> On Tue, Apr 8, 2014 at 12:04 PM, Erick Wellnitz >> <[email protected]>wrote: >> >>> >>> >>> I removed an audio-only (non-hardware) trusted relay point. It seems >>> that the phones set to use a trusted relay point continue to use this MTP >>> as a relay point. >>> >>> Resets do not seem to help at all. Is there something I'm missing? Do >>> I need to turn off TRP and turn it back on on the phones? >>> >>> >>> >>> _______________________________________________ >>> cisco-voip mailing list >>> [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-voip >>> >>> >> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
