Hey Guys/Gals,
I seem to be having a problem with an install of Cisco IP Communicator (8.6.3.0) not picking up the auxiliary Voice VLAN configuration. In short we have the option 150 details listed on the voice vlans and not the data and I keep receiving a TFTP server not found error. But when these are manually set the phone registers fine (with the data vlan IP). As you can imagine this is not ideal as we do not want to add the option 150 to the data vlans if possible. Cisco’s documentation states that this should be possible. CDP Cisco IP Communicator uses CDP to communicate information such as auxiliary VLAN ID, per-port power management details, and QoS3 configuration information with the Cisco Catalyst switch Switchport config interface gi 1/2 switchport access vlan 666 switchport mode access switchport voice vlan 999 no snmp trap link-status spanning-tree portfast spanning-tree bpduguard enable Anyone seen this before? -- - Nick
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
