The only data I see in the CMR are the IP addresses of the endpoints and the payloadcapability. All the packets sent/received, jitter, latency, etc values are always just 'null'.
Sample below. [image: Inline image 1] On Mon, Apr 28, 2014 at 2:10 PM, Ryan Ratliff (rratliff) <[email protected] > wrote: > What specific data are you looking for? The newer phones have dropped MOS > and Q-Factor subjective ratings in lieu of concealed seconds and severely > concealed seconds. > > You won't see any raw MOS values reported by newer phones. > > -Ryan > > On Apr 25, 2014, at 1:16 PM, Justin Steinberg <[email protected]> > wrote: > > I've noticed on the last few systems I have worked on that the SIP based > phones are not showing any CMR data in the CUCM CAR system. > > This is happening on atleast 8945s & the new 7841s. Also I have noticed > that the Jabber for Windows phones aren't reporting it either. > > This is happening for both on-net IP phone to IP phone calls and also > off-net SIP calls to CUBEs (then to SIP Provider) and also off-net calls > via CUCM SIP trunk to Cisco 29xx PRI gateway. > > Is there something I need to turn on for the CMR data to be generated ? > Or is this just not supported in the SIP phones / CUCM ? > > Justin > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
