Lelio, That sounds fine to me and how I've done it before.
Brian On Tue, Apr 29, 2014 at 1:53 PM, Lelio Fulgenzi <[email protected]> wrote: > > We've built SIP trunks to our Nuance Speech Attendant servers, but have > been told that in order to ensure failover in the event the servers are not > responding, we need to build a loopback SIP trunk back to the CallManager > servers so the call is handled. > > I'm not sure of all the SIP parameters we need, I'm gonna start with > defaults, but heeding the old rule of "never allow a trunk to dial a number > that can reach itself" I was going to do the following: > > - create a SIP trunk with all cluster members as Destinations > - check "Run On All Active Unified CM Nodes" > - create a "SIP Loopback" partition and put only that partition into a > "SIP Loopback" search space > - in the "SIP Loopback" partition, create a translation for each route > pattern with the failover destination > > Any thoughts, will this give me what I need? > > > Thanks, Lelio > > > > --- > Lelio Fulgenzi, B.A. > Senior Analyst, Network Infrastructure > Computing and Communications Services (CCS) > University of Guelph > > 519‐824‐4120 Ext 56354 > [email protected] > www.uoguelph.ca/ccs > Room 037, Animal Science and Nutrition Building > Guelph, Ontario, N1G 2W1 > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
