Seems that huwaie is releasing the call, with no route to destination
Src-port="1720"
Received H.225 PDU:
Q931
{
Message Type: Release Complete
Call reference flag: Message sent to originating side
Call reference value: 0xa
Info Element : Cause
{
Location: Usr
Cause Value: No route to destination
}
Info Element : Display
{
Display Information = Huawei Technologies Co., Ltd.
}
Info Element : User User
{
Length = 23
}
}
On 08-May-2014 8:29 pm, "Thomas LeMay" <[email protected]> wrote:
> We are rolling out Cisco Jabber version 9.6.0 build 17088 and Microsoft
> Lync version 4.0.7577.4419. Some users experience a condition where both
> Lynch and Jabber initiate the phone call and provide simultaneous audio
> channels in stereo. Thus, both Lync and Jabber are both providing
> simultaneous dial tone and are handling the voice calls. Other users do
> not experience this issue. Has anyone experienced this before and are
> there any solutions?
>
>
>
> Thank you,
>
>
>
> Tom
>
> _______________________________________________
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
