This is sort of a silly question, but the answer to it is unclear to me from the information in the thread thus far:
What 's the observed behavior with those same browser clients when the TCP / HTTP session does not traverse a loadbalancer? Can I safely assume that that has at least been tried? -Pete On Mon, May 12, 2014 at 4:17 PM, Brian Meade <[email protected]> wrote: > You're going to need to get packet captures for a client connecting directly > and then another set for going through the F5. You'll want to get the > captures on both sides of the F5. > > That's what was needed in order to solve the issue Wes referenced. > > Brian > > > On Mon, May 12, 2014 at 3:38 PM, <[email protected]> wrote: >> >> I’ve tried different versions of IE on the client. In every version, >> UCMUser and ELM pages take forever to load thru the F5, but immediately load >> when going directly to the CUCM server. >> >> >> >> From: John Kougoulos [mailto:[email protected]] >> Sent: Friday, May 09, 2014 4:10 PM >> >> >> To: Hendrix, George (Bill) @ NSS - STRATIS >> Cc: cisco-voip voyp list >> Subject: Re: [cisco-voip] Issues going thru F5 to UCMUser page >> >> >> >> But are you using internet explorer and not firefox? >> >> Regards, >> >> John >> >> >> >> On Fri, May 9, 2014 at 9:25 PM, <[email protected]> wrote: >> >> Actually, the F5 is running version 11.5. Also, I did a little more >> testing and discovered that pages like ccmadmin, ccmservice all load just >> fine. The only pages that seem to have issues loading are ELM and UCMUser. >> >> >> >> -Bill >> >> >> >> From: Wes Sisk (wsisk) [mailto:[email protected]] >> Sent: Wednesday, May 07, 2014 5:18 AM >> To: Hendrix, George (Bill) @ NSS - STRATIS; [email protected] >> Subject: RE: Issues going thru F5 to UCMUser page >> >> >> >> From a previous encounter: >> >> Problem Description: >> >> After upgrading Call Manager from 8.6.2.20000-2 to 8.6.2.22900-9, ccmuser >> friendly url translation via F5 had 6-7 minute delays in loading. >> >> >> >> Resolution Summary: >> >> F5 was upgraded to Build 2806 version 11.3 after which the delay was not >> seen anymore. >> >> >> >> Technical snippets: >> >> Compatibility issue with SSL renegotination Cipher. >> >> >> >> -Wes >> >> >> >> >> >> ________________________________ >> >> From: cisco-voip [[email protected]] on behalf of >> [email protected] [[email protected]] >> Sent: Tuesday, May 06, 2014 8:43 PM >> To: [email protected] >> Subject: [cisco-voip] Issues going thru F5 to UCMUser page >> >> Hey Guy, >> >> >> >> We have F5 load balancers fronting access to our CallManager Server >> (CUCM 9.1) pages for users. I can get to CCMAdmin and other pages thru the >> F5s without issue. However, for some reason when going to the UCMUser page >> thru the F5, it seems to take forever to load. Has anyone else seen this? >> >> >> >> Thanks, >> >> Bill Hendrix >> >> >> _______________________________________________ >> cisco-voip mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-voip >> >> >> >> >> _______________________________________________ >> cisco-voip mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-voip >> > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
