Jason, The non-video phones should be able to use a video conference bridge but it will use up DSP resources really fast. I'd suggest having the separate audio-only dspfarm profile if possible. The non-video phones will prefer a non-video conference bridge by default as part of the Intelligent Bridge Selection feature.
Brian On Wed, May 28, 2014 at 6:05 PM, Jason Aarons (AM) < [email protected]> wrote: > Customer is moving from 2811/PVDM2s the 2911/PVD3/15.2. Customer has mix > of 7965 and 9971 video phones. > > > > I am planning the PVDM3-128/256/sDSPs need in each 2911. > > > http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmevconf.html#pgfId-1055244 > <<this running-config is for CME but applies to CUCM as well > > > > They will have a mix of 9971 video/audio and 7965 audio conference using > Cisco IOS Homogenous Video Conferences. > > > > Is it necessary in the router and CUCM to configure both of these dspfarm > profiles or will the video do voice-only calls too? > > > > dspfarm profile 1 conference video homogenous > > codec g729r8 > > codec g711ulaw > > codec h264 vga > > max conference-participants 4 > > max session 6 > > associate application SCCP > > no shut > > ! > > dspfarm profile 2 conference > > codec g729r8 > > codec g711ulaw > > max session 6 > > associate application SCCP > > no shut > > > > In short if I only configure profile 1 is that fine? Can it do both audio > and video conferneces, say if only 7965 endpoints us it, then it would be > used for audio only? Or does it have to be a video to for that profile? > > > > Do I even need to configure profile 2? > > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
