FYI, i back the phone back to 8.3.3, they work fine. The phones do have a time zone and date. (This is the correct time zone, time, and date for my area)
*Time**12:42:33p**Time Zone**America/New_York**Date**06/03/14* On Tue, Jun 3, 2014 at 11:40 AM, Jason Aarons (AM) < [email protected]> wrote: > If you http://phoneip/ do you see a date/timezone in the bottom? Trying > changing your Device Pool/DTG to something and back? > > > > Can you http://serverip:6970/SEP<mac>.cnf.xml and view the phone’s config? > > > > *From:* cisco-voip [mailto:[email protected]] *On Behalf > Of *Mike King > *Sent:* Tuesday, June 03, 2014 11:08 AM > *To:* Cisco VoIPoE List > *Subject:* [cisco-voip] 7970 phones won't register in Lab > > > > > > We just purchased a BE6K to setup a lab. > > > > I've run through the setup, and have that all sorted, or so I think. (So > the environment may or may not be the issue) > > > > We have a couple of very phones we were going to recycle. > > > > Right now we have two, a 7970, and a 7971. > > > > The started life phone firmware at 6.0(2). Utilizing factory defaulting > off my laptop, I got them to 8.3.3. (I couldn't get them to associated with > 6.0(2)) > > > > Running 8.3.3, they were able to register, and function. > > > > I pushed the firmware up to 9.3(1SR3.1S) > > > > Now none of the phones are registering. I've read the release notes, and > I should be able to goto 9.3.1 from 8.3.3 directly on these phones, with no > further intermediate releases. > > > > Attached is one of the phone logs. Both phone's are showing the same > behavior. > > > > The phone is just sitting there with the wrong date and time in the > corner, and every once and awhile will print out "Registration Rejected: " > > > > Any Idea's why the phones are being rejected? > > > > itevomcid >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
