Hoping to get some more detail on this… Does anyone know if the value for “pvalue” in the command below represents the EWS pageSize parameter?
run cuc dbquery unitydirdb execute procedure csp_ConfigurationModify(pFullName='System.Messaging.MbxSynch.MbxSynchVoiceMailCountLimit', pvalue="newvalue" The UM guide says: ”new value specifies the value of the voicemails count limit that you can view after the paging parameter is enabled. Unity Connection by default manages the first 25000 voice messages per mailbox that avoid any delay in message synchronization between Unity Connection and Exchange server.” It seems a voice message count of 25,000 is rather extreme, even when including receipts. Should this article be referring to message and item count instead of voicemails? Does the pvalue=”<value>” represent the number of results being requested by Unity via EWS? If so, then is it correct to say the default pageSize value is 25,000, which represents total results per page, and includes more than just voice messages? Any detailed clarification would be great. This isn’t an issue, only trying to gather more information on Unity’s paged view operation. Thanks - Dan From: cisco-voip [mailto:[email protected]] On Behalf Of Daniel Pagan Sent: Thursday, September 11, 2014 11:48 AM To: Justin Steinberg Cc: [email protected] Subject: Re: [cisco-voip] EWS Limits & Throttling Policy Thanks – I noticed this as well and the preceding statement under the Exchange 2010 SP2 RU4 section made me question the page view function when I first reviewed it, but it does seem to act as a solution in this case. I reviewed a few other articles where paged view functionality is mentioned and it appears to be helpful in this situation. For others who might encounter this thread in the future… In addition to the article Justin provided: Enhancement Defect: https://tools.cisco.com/bugsearch/bug/CSCtz20281 Unity SU4 ReadMe – mentions the addition of the page view function: http://www.cisco.com/web/software/282074295/111182/862asu4cucrm.pdf Neat article explaining the details and providing examples behind page searches and the EWS API: http://msdn.microsoft.com/en-us/library/office/dd633698(v=exchg.80).aspx Thanks again for the tip, Justin - Dan From: Justin Steinberg [mailto:[email protected]] Sent: Thursday, September 11, 2014 11:08 AM To: Daniel Pagan Cc: [email protected]<mailto:[email protected]> Subject: Re: [cisco-voip] EWS Limits & Throttling Policy I've successfully used the 'paged view functionality' on the later versions of Connections that works around this issue by staying under the EWS default limits. http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/unified_messaging/guide/10xcucumgx/10xcucumg020.html#83993 On Thu, Sep 11, 2014 at 10:52 AM, Daniel Pagan <[email protected]<mailto:[email protected]>> wrote: Folks: I’m hoping someone can share their experience with the Cisco recommended method for removing EWS limits on Exchange 2010 SP2 RU4 and higher. In earlier releases of Ex2010 the process of setting a throttling policy applied only to the UM service account, and any throttling performed would be applied to that service account and not to the target mailbox. Please correct me if my understanding is incorrect, but with E2010 SP2 RU4 and higher, the policy is to be applied to every target mailbox, which seems like it would impact all other EWS applications impersonating these target mailboxes. Removing EWS Limits from Exchange 2010 SP2 RU4 and Later Microsoft has enabled the client throttling policy feature by default. If there is no throttling policy already configured, Microsoft Exchange applies a default policy to all users. The default throttling policy is tailored for end user's load and not for an enterprise application like, Cisco Unity Connection using impersonation. If any Cisco Unity Connection users who are configured for unified messaging have mailboxes in Exchange 2010, configure the Exchange 2010 EWS limits for the unified messaging users mailbox by creating and applying a new mailbox policy to the unified messaging user mailbox account. If you do not configure EWS limits, messages may not be synchronized, and status changes (for example, from unread to read), changes to the subject line, and changes to the priority may not be replicated. In addition, attempts to access Exchange calendars and contacts may fail. The MS KB referring to the throttling policy change: http://support.microsoft.com/kb/2713371 Perhaps my understanding is wrong, but it seems like a backwards move. Has anyone seen any adverse effects of applying the Cisco recommended throttling values as the system default? Perhaps any problems where applying the throttling policy to the target mailbox impacts other EWS apps like BlackBerry Enterprise? Are you applying the throttling policy for every single UM enabled mailbox, individually, via management shell? Thanks! - Dan _______________________________________________ cisco-voip mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
