page 20 http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/cuacs/10_5_1/install_admin_guide/CUACS1051GUIDE.pdf
So the customer would need to upgrade licensing from Enhanced to Enhanced Plus for CUACS to work. I made an assumption that the new CUACS worked like the old, and that IM&P wasn't mandatory for line status. Somehow Matt Wyndhamm left that licensing Enhanced Plus cost/part out of his demo.. https://www.youtube.com/watch?v=6mltZygLYuE ________________________________ From: cisco-voip [[email protected]] on behalf of Jason Aarons (AM) [[email protected]] Sent: Tuesday, September 16, 2014 4:41 PM To: [email protected] Subject: [cisco-voip] CUACS 10.5.1 and BLF? The operator noticed that there is no line status information in CUACS? I was assuming a Attendant Console Standard would show if the phone was on-hook vs off-hook. The only Presence information I can find seems to be related to Jabber/IM&P Or should CUACS 10.5 show line state information? They couldn't keep CUBAC 9x as it was supported with CallManager 10.x. While it worked, it was unsupported. So the version change to CUACS had to happen. itevomcid
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
