Thanks Josh, I set it up like this but wanted to double check. On Mon, Nov 10, 2014 at 1:20 PM, Josh Warcop <[email protected]> wrote:
> Dedicated LOM. Single vSwitch with both NICs. Etherchannel from the > switch. > > Sent from my Windows Phone > ------------------------------ > From: Boon <[email protected]> > Sent: 11/10/2014 6:36 AM > To: [email protected] > Subject: [cisco-voip] UC on UCS C-Series with only two on-board 1Gbps > Ports - Best Practice Network Connectivity > > Customer has ordered the 2 port C220-M3S server which is based on the BE > version. They haven't purchased the BE bundle so the server has been > shipped from Cisco with only the RAID Array setup. I need to design and > setup the NICs for both vSphere management and the virtual machine > traffic. > > Can anyone advise on what is best practice for this setup or how BE > bundles are configured when shipped from Cisco? Unfortunately I only have > experience of working with C-Series with the 4-port PCIe cards for which > the setup is reasonably well documented. > > Thanks > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
