CSCul38509 CUCM DRS backup fails with windows 7 and 2008 <B>Symptom:</B> CUCM 8.6.2 or 9.1(2) and later DRS backup may fail due to interoperability issues with Windows 7 or Windows 2008 based SFTP servers or any SFTP server which uses SMB2 to access disk storage.
<B>Conditions:</B> This has been observed under Windows 7 and Windows 2008. To check if you are affected please conduct the following steps during file upload to your Windows-based SFTP server: a) open CMD and change your current folder to SFTP root directory b) issue dir command to check what is the size of the file being uploaded c) you are affected if the file size is 0, it is not increasing, and it gets updated as soon as you issue dir /R command <B>Workaround:</B> 1. Use linux-based SFTP server or 2. From SFTP server do not mount storage via SMB2 <B>Further Problem Description:</B> https://supportforums.cisco.com/thread/2218075 . This arises due to fix implemented with CSCtc49288 -Wes On Dec 19, 2014, at 12:04 PM, Erick Bergquist <[email protected]> wrote: Has anyone seen the CDR component backup fail with 9.1.2 SU2a? I've seen problems every few days and the DRF local traces show the file size is 0 and not increasing and eventually the backup attempt fails out with SFTP Server is full message in logs. The server is not full and other backups are working fine (Unity 9.1.2 SU2a, etc). _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
