I don't know about standalone, but from this matrix: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html it looks like you need 9.0 for the mx200 and if it's a g2, then 10.5
That doesn't sound right, but unless that doc is way off or I'm not understanding it. Good luck with it On Sat, Jan 17, 2015 at 9:07 PM, Henry Gicheru (KE) < [email protected]> wrote: > > > Hi guys, > Anyone who have tested MX200 or MX300 as standalone? Can't see the option > of configuring H323 mode to direct. Am doing a demo and i have mx200 and > mx300. If standalone option isn't possible can the two register on cucm 8.5 > SU3 as this is the version the client is using? As of now i don't have a > server for installing vcs or cucm 8.6+ for the demo. > > Regards, > Henry Gicheru > > This email and all contents are subject to the following disclaimer: > "http://www.dimensiondata.com/emaildisclaimer"; > <http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx> > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
