Erick, are you doing advanced networking on the C or NAT reflection for the traversal? Is your traversal connected? I would check for firewall drops when trying to connect if the traversal is connected.
On Thu, Apr 2, 2015 at 6:50 PM, Erick Wellnitz <[email protected]> wrote: > Not a security or a firewall guy so please bear with me. > > We've opened up the ports as advised in this: > http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Cisco-Expressway-IP-Port-Usage-for-Firewall-Traversal-Deployment_Guide-X8-1.pdf > > Now, the weird part is that with a jabber client on the internet we get no > RTP with this configuration. Only when we open any to the Expressway-E do > we get RTP, however we don't get signalling to the jabber client on the > internet. > > Are there any other ports we should be opening? > > I was under the impression that creating the UC Traversal zone opened up the > logical channel between the C and the E so that everything outbound to the > internet could get to the DMZ and out to the internet. Am I > misunderstanding? Is there more configuration I need to piece together to > make the solution whole? > > Thanks in advance! > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
