Thanks Dave,
I tried that but, seeing as I have a Windows x64 system and x64 Office
2013, my system does not like the xlt file. I am building a x32
system, in one of my VM's. That should allow me to get into the template.
Thanks for the guideline.
-Mike
Michael T. Voity
University of Vermont
On 4/13/2015 4:32 PM, Dave Goodwin wrote:
Mike, I have not tried this, and it is a pretty recent doc, but take a
look at this and see if it might work for you, or at least save you
part of the configuration work:
http://www.cisco.com/c/en/us/support/docs/unified-communications/bulk-administration-tool/118882-config-vg-00.html
-Dave
On Mon, Apr 13, 2015 at 3:56 PM, Michael T. Voity <[email protected]
<mailto:[email protected]>> wrote:
Jason,
Thanks for the quick response.
I have been successfully (with removing columns and speed dial
stuff) taking a BAT export of all (33) VoIP phones from my 8.5.1BE
system to my new 10.5.2 system.
I only have 1 pots/ analog port on a VG224 on the 8.5.1BE that is
not going to be used on on the 10.5.2.
What I am look for is a way to build 100+ lines on a VG350 in MGCP
using BAT in 10.5.2 from scratch.
Thanks in advance.
-Mike
Michael T. Voity
University of Vermont
On 4/13/15 3:29 PM, Jason Aarons (AM) wrote:
You can’t export/import on different versions as the database is
different between versions.
In reality doing an export/import on same version has its own
headaches.
A suitcase export/import tool like COBRAS would be a nice product
enhancement request.
*From:*cisco-voip [mailto:[email protected]] *On
Behalf Of *Michael T. Voity
*Sent:* Monday, April 13, 2015 3:17 PM
*To:* voip puck
*Subject:* [cisco-voip] BAT on VG350 ports
Hello,
I have combed the gossamer threads looking for threads on how one
could
export gateway endpoints (POTS analog line) of a vg350, filling the
sheet with 144 lines, then doing an import with the BAT tool.
I have CUCM 10.5.2.10000-5.
I noticed that on my 8.5.1 system that analog phones/line show up
under
"Devices->Phone" and on the 10.5.2 system the analog phones/line
only
show up under "Devices->Gateways->Gateway Endpoints"
Ideas?
-Mike
--
Michael T. Voity
University of Vermont
_______________________________________________
cisco-voip mailing list
[email protected] <mailto:[email protected]>
https://puck.nether.net/mailman/listinfo/cisco-voip
itevomcid
_______________________________________________
cisco-voip mailing list
[email protected] <mailto:[email protected]>
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
