I'm confused as to why you have to give the SIP trunk an MRGL which has an
MRG set for Multicast? Can't you just build the MRG without that checkbox
checked?
Example:
Trunk
Device Pool
MRGL
MRG (checkbox for MMOH unchecked)
MOH_2 (checkbox for MMOH checked)
Phone
Device Pool
MRGL
MRG (checkbox for MMOH checked)
MOH_2 (checkbox for MMOH checked)
The Trunk would use unicast and the Phones would use multicast. All from
the same MOH server and all from the same source. You're just controlling
it at the MRG level.
On Tue, Apr 21, 2015 at 8:37 AM Mark Holloway <[email protected]> wrote:
> Has anyone else heard rumors that Fixed Audio Source may get Unicast
> support again at some point with CUCM 11? I’ve got a handful of customers
> with SIP Trunks and cannot stream MoH to their SIP Trunk provider because
> the stream needs to be Unicast. They are not using CUBE as the SBC. I don’t
> suppose there is any way to use a router to convert the stream to Unicast
> before it hits the SBC?
>
>
> On Apr 13, 2015, at 4:42 PM, Brian Meade <[email protected]> wrote:
>
> Are you just talking about for fixed audio source?
>
> On Mon, Apr 13, 2015 at 4:07 PM, Mark Holloway <[email protected]>
> wrote:
>
>> Are there any plans for Cisco to allow (bring back) Unicast MoH on 10.5?
>> If trunking CUCM to a non-Cisco device there are cases where MoH breaks
>> because not every endpoint will support Multicast.
>>
>> Thanks,
>> Mark
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> [email protected]
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>
> _______________________________________________
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
