Can you ping it from your gateway? Double check your subnet mask and make sure it matches your other hosts.
Verify ICMP and HTTP/S is allowed - utils firewall ipv4 list You can disable and test – utils firewall ipv4 disable Verify services are running - utils service list [cid:[email protected]]<http://www.force3.com/> Rob Dawson Solutions Architect 2151 Priest Bridge Dr. Crofton, MD 21114 O 410-774-7153 M 571-234-2621 Check out the new Force3.com<http://www.force3.com> ! [Facebook]<https://www.facebook.com/force3inc>[Twitter]<https://twitter.com/force3>[LinkedIn]<http://www.linkedin.com/company/force-3> From: cisco-voip [mailto:[email protected]] On Behalf Of Jason Aarons (AM) Sent: Tuesday, May 12, 2015 7:53 AM To: Techguy; Cisco VoIP Group Subject: Re: [cisco-voip] IMP not pinging if you can't ping it and the console isn't coming up, then it sounds like a re-install is necessary. I assume you've tried some reboots etc. ________________________________ From: cisco-voip [[email protected]] on behalf of Techguy [[email protected]] Sent: Tuesday, May 12, 2015 3:03 AM To: Cisco VoIP Group Subject: [cisco-voip] IMP not pinging Hi all, Installed an IM&P 8.6 in the lab but is not pingable. I can ping other nodes from it (using console), but not vice versa. Unable to access the GUI. Any known considerations to try? All nodes are in the same class-c network. Thanks itevomcid
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
