Thanks for pointing this out! I’ll get the doc updated. The rest of the list:
"**##*1", // analysis trace on/off "**##*2", // terse/verbose toggle "**##*3", // dump digit discarding instructions "**##*4", // dump patterns "**##*5", // dump partitions list "**##*6", // dump css list "**##*7", // dump feautre css content list "**##*8", // dump device css context list "**##*9", // dump line appearance css context list "**##*10", // dump line css context list "**##*11", // dump multiple partitions list "**##*12", // dump VM Profile list "**##*13", // dump VM Pilot number list "**##*14" // dump regions list & dump in memory db Forward Manager "**##*30" // Enable Debug "**##*31" // Dump Intercept Table "**##*32" // Dump Active Call Table "**##*33" // Dump Pickup Table "**##*34" // Refresh Intercept Table "**##*35" // Clear Callforward Loop Prevention Tables Pickup Manager "**##**30" // Enable Debug "**##**31" // Print the Pickup Group "**##**32" // Print the Pickup Member DNs "**##**33" // Print the Pickup monitored alerting calls "**##**34" // Print the active pickups "**##**35" // Print the active pickup monitorings Many cobwebs on this one.. background: Which Trains: 3.3 main train supports (enable code, dump intercept table, clear fwd loops) 3.3 ES/SR ... supports (enable code, dump intercept table) 3.4 supports (enable code, dump intercept table) 4.0 supports all codes This was implemented with CSCed29942, CSCdy87797. -Wes On Jun 25, 2015, at 11:59 AM, Daniel Pagan <[email protected]<mailto:[email protected]>> wrote: I know it’s not an exact match but it’s very similar to a dialing forest dump procedure off a SCCP handset: https://supportforums.cisco.com/document/97751/how-dump-ccm-memoryimdb-diagnostic-information-traces I personally haven’t used the “**##**32” you mentioned though. - Dan From: cisco-voip [mailto:[email protected]] On Behalf Of Pawlowski, Adam Sent: Thursday, June 25, 2015 11:44 AM To: '[email protected]<mailto:[email protected]>' Subject: [cisco-voip] Strange Number Does anyone here know what “**##**32” is supposed to be? It seems I can dial this but it is not actually … anything ? It just clears out and goes away. This is from SCCP sets anyways to UCM. Adam _______________________________________________ cisco-voip mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
