OK, voicemail works.. with 10.3.1... outbound calls do not... checked with a 7900 series at the site, it works fine... I am debating on throwing the 8800s in the dumpster.
Jonathan On Tue, Jul 7, 2015 at 7:03 PM, Ryan Huff <[email protected]> wrote: > On the intetnal side, do your skinny ports have access to an mtp? > > On the external side, what DTMF signaling methods are you supporting? Just > rtp-nte? > > Do you have any other SIP phones at this site/cluster? > > Thanks, > > Ryan > > > -------- Original Message -------- > From: Jonathan Charles <[email protected]> > Sent: Tuesday, July 7, 2015 07:44 PM > To: Ryan Huff <[email protected]> > Subject: Re: [cisco-voip] Cisco 8841/51 not sending DTMF... > CC: [email protected] > > I am SCCP to CUC; SIP to SIP for PSTN (SIP trunk to CUBE, SIP trunk to CL) > > On Mon, Jul 6, 2015 at 3:27 PM, Ryan Huff <[email protected]> wrote: > >> Are you sip to cuc ab d the pstn? If so, what is your dtmf support in >> your trunks? >> >> Thanks, >> >> Ryan >> >> >> -------- Original Message -------- >> From: Jonathan Charles <[email protected]> >> Sent: Monday, July 6, 2015 04:11 PM >> To: [email protected] >> Subject: [cisco-voip] Cisco 8841/51 not sending DTMF... >> >> We have a site with new Cisco 8841 and 51 phones (CUCM 10.5.2), running >> 10.2.2.16, and they are not sending DTMF externally... or internally to >> voicemail. >> >> An IP Communicator does send DTMF without issue. >> >> Any known issues with these new phones? >> >> >> >> >> Jonathan >> > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
