Hi All, I'm resurrecting an old thread from the deep, where Nate suggested using DigiCert wildcard certificates for UC infrastructure.
I'm trying to use some of these for a Expressway MRA implementation, and am struggling with the TLS-verification between the Expressway-E and Expressway-C. There are a few posts out there on 'tinternet that seem to suggest that Wildcard certificates aren't supported, however Nate's post below indicated that the digicert wildcards worked fine with expressway. Before I put a permanent dent in this desk with my head, has anyone else had success with Digicert wildcard certs in an Expressway MRA deployment? Cheers Ian >* On 5 Feb 2015, at 16:51, NateCCIE <nateccie at gmail.com ><https://puck.nether.net/mailman/listinfo/cisco-voip>> wrote: *> >* Use DIGICERT! You can get a wildcard cert from them, and use it over and over. So you just generate the cert based on the CSR from each app and it loads right in. *> >* Works great on CUCM, CUC, CUP, & Expressway! *
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
