You may try a hunt group/broadcast and put both DNs in seperate partitions.
Thanks, Ryan -------- Original Message -------- From: Jacky Cai <jacky...@gmail.com> Sent: Saturday, August 15, 2015 09:49 PM To: VOIP Group <cisco-voip@puck.nether.net> Subject: [cisco-voip] route to two dial peers simultaneously in ios voice gateway >Is there any configuration which can route a call to two dial peers >simultaneously in IOS voice gateway? > >I have a CUCM cluster and another IP PBX system. each user have an endpoint >in each system. the two endpoints has the same extension number. a cisco >IOS voice gateway is working for both systems for PSTN access. Now it is >required that when a call comes in from PSTN to the voice gateway, two >endpoints in both systems can be ringing simultaneously. i have two voip >dial peers in the voice gateway to route the calls to two systems. but with >the current configuration, only one endpoint is ringing unless the first >system failure. >Knowing that the "remote destination" feature in CUCM can make both >endpoint ringing simultaneously. just wondering if there is a way in voice >gateway can achieve this. >the voice gateway is running on H323. > >Thank you. > >Jacky Cai > >_______________________________________________ >cisco-voip mailing list >cisco-voip@puck.nether.net >https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
