I believe that is correct, the actual audible tone comes from the phone, triggered to play through signaling from the call control server.
Thanks, Ryan -------- Original Message -------- From: NateCCIE <natec...@gmail.com> Sent: Thursday, August 20, 2015 07:21 PM To: 'Ryan Huff' <ryanh...@outlook.com>,"'Jason Aarons, (AM)'" <jason.aar...@dimensiondata.com>,cisco-voip@puck.nether.net Subject: RE: [cisco-voip] 3905 dial tone problem >I always thought dialtone on a ip phone was a wav file, part of the locale >that is downloaded to the phone. > > > >From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Ryan >Huff >Sent: Thursday, August 20, 2015 4:42 PM >To: Jason Aarons, (AM) <jason.aar...@dimensiondata.com>; >cisco-voip@puck.nether.net >Subject: Re: [cisco-voip] 3905 dial tone problem > > > >My thoughts ... > >Maybe switch to the inactive load and test as a quick-fix. > >Is this the only sip endpoint in this CME that is impacted? Are there SCCP >endpoints and if so, do they have the same issue? > >Can customer complete a dial and does the issue continue once connected? > >Thanks, > >Ryan > > > >-------- Original Message -------- >From: "Jason Aarons (AM)" <jason.aar...@dimensiondata.com ><mailto:jason.aar...@dimensiondata.com> > >Sent: Thursday, August 20, 2015 06:29 PM >To: "cisco-voip (cisco-voip@puck.nether.net ><mailto:cisco-voip@puck.nether.net> )" <cisco-voip@puck.nether.net ><mailto:cisco-voip@puck.nether.net> > >Subject: [cisco-voip] 3905 dial tone problem > >3905 registered to CME, when you pick up a headset, the dial tone begins. But >it seems to skip like an old record, it buzzes and pauses. > > > >Not finding a bug, customer didn’t tell me load or CME version etc. > > > >I’m thinking this is a load problem as you haven’t even dialed yet. > > > > > > >
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip